Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
Thanks! We received your request.
Something went wrong. Please try again.
At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical paver joint job or pool base topping only needs a fraction of a yard unless you're covering a large patio. For mortar mixing, order based on batch volume rather than square footage, since it's a component in a mix rather than a surface layer. Most residential jobs in Albany land somewhere between half a yard and two yards depending on scope.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your sand isn't the quantity or quality you ordered, we'll make it right.
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical paver joint job or pool base topping only needs a fraction of a yard unless you're covering a large patio. For mortar mixing, order based on batch volume rather than square footage, since it's a component in a mix rather than a surface layer. Most residential jobs in Albany land somewhere between half a yard and two yards depending on scope.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all co...
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!
Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!
Sand pairs naturally with paver base stone underneath and polymeric jointing sand on top, and if you're mixing mortar you'll likely also need brick or block delivered separately. A lot of Capital City patio jobs also call for a clean chip stone base layer since it drains better under our clay subsoil than sand alone.
Service area
Albany's clay subsoil holds water longer than sandy ground, which matters when you're setting pavers. Compact your base stone thoroughly before adding sand, because loose or wet clay underneath will let the whole assembly settle unevenly after a few freeze thaw cycles. If you're working before the ground has fully thawed after our May 1 last frost, wait a couple extra weeks, since compacting over half-frozen clay never holds.
A common mistake is using this sand as paver bedding under heavy foot traffic patios. It's being phased out for that use in favor of clean chip stone, which locks together and does not pump up through joints the way sand can after repeated rain. Save this sand for mortar mixing, pool bases, and joint filling, and use chip stone for the structural bedding layer instead.
If your project spans mortar work and joint filling, order slightly more than your calculated total rather than making two separate deliveries. Sand left over does not go to waste on a working job site, it gets used for touch ups, leveling low spots, or the next small project. Buying in one trip also means one delivery fee instead of two.
Albany's clay soil is unforgiving when it comes to drainage, so sand plays a real role in projects where water needs somewhere to go, like under a paver patio or around a pool base. With hardscape season here squeezed between a May 1 last frost and an October 10 first frost, contractors move fast once the ground firms up. This sand's uniformity is what makes it work for mortar mixing, since clay-heavy local dirt does not behave the same way when you're trying to get a workable mix on site.
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.
