Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Thanks! We received your request.
Something went wrong. Please try again.
At a 1 inch depth, one cubic yard covers about 324 square feet, so a small paver patio or pool base might only need half a yard to a yard. For mortar mixing, quantity depends more on your mix ratio and job size than square footage, so many masons order by estimated bag equivalents converted to yardage. Measure your area first, then decide if you're spreading a bedding layer or mixing mortar, since those two uses call for different math.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your sand isn't the quantity or quality you ordered, we'll make it right.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
At a 1 inch depth, one cubic yard covers about 324 square feet, so a small paver patio or pool base might only need half a yard to a yard. For mortar mixing, quantity depends more on your mix ratio and job size than square footage, so many masons order by estimated bag equivalents converted to yardage. Measure your area first, then decide if you're spreading a bedding layer or mixing mortar, since those two uses call for different math.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!
Most paver and patio jobs pair mason sand with crushed stone base material underneath and polymeric sand for the joints on top. If you're going the paver route, know that a lot of Anderson contractors are shifting joint work to clean chip stone instead of traditional jointing sand, since it resists washout and does not pump up through the joints. For mortar work, you'll just need the sand, cement, and lime on hand.
Service area
Mason sand for mortar should stay bone dry until you're ready to mix, because damp clumps throw off your water ratio and weaken the bond. In Anderson's humid stretches from May through September, store your pile under a tarp on a pallet or dry gravel pad, not directly on wet clay soil, or it will wick moisture up from below within a day or two.
A common mistake on paver jobs here is using mason sand as the bedding layer under the pavers themselves. It's too fine and washes out or migrates under Anderson's seasonal downpours. Use a coarser bedding or base material for structural support and save mason sand for joint work or mortar mixing where its fine, uniform texture actually matters.
If your project spans both mortar work and joint filling, order mason sand for the mortar batches and consider clean chip stone for the joints instead of traditional sand. Chip stone resists the pumping and washout that loose sand joints suffer through heavy Piedmont rain events, which means fewer callbacks and less re-filling of joints a year or two down the road.
Anderson sits on heavy clay, and clay does not drain like sand does, which is exactly why sand gets used to build a stable, permeable layer under pavers and pool decks instead of building directly on native soil. With hardscape work picking up every spring as the ground dries out from winter, mason sand moves fast for mortar mixing on brick and stone projects downtown and around newer builds. It is also standard for pool base work, since the fine, uniform grain gives a smooth, even surface that clay subsoil cannot provide on its own.
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.
