Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Thanks! We received your request.
Something went wrong. Please try again.
One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs call for 6 to 12 inches depending on how much grade you're correcting. Measure the low area in square feet, decide your target depth, and order in cubic yards from there. For a pool backfill or foundation perimeter, it's usually faster to measure the actual void volume than to eyeball square footage.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your fill dirt isn't the quantity or quality you ordered, we'll make it right.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs call for 6 to 12 inches depending on how much grade you're correcting. Measure the low area in square feet, decide your target depth, and order in cubic yards from there. For a pool backfill or foundation perimeter, it's usually faster to measure the actual void volume than to eyeball square footage.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!
Most fill dirt jobs in Atwater finish with a topsoil cap once the grade is where it needs to be, especially if lawn or planting beds are going in over it. Some homeowners also order a base layer of coarser material below the fill for extra drainage around pools or low foundation areas. Pairing fill dirt with topsoil on the same order keeps the project moving without waiting on a second delivery.
Service area
Never dump fill dirt in one deep pour. Spread it in 6 to 8 inch lifts and compact each one with a plate compactor or hand tamper before adding the next. Skipping this step is the single most common reason people end up with a sunken patch two years later, especially around pool decks and foundation backfill where the ground gets walked on or built over.
Fill dirt is not a growing medium, it's subsoil with the organic matter screened out, so nothing will thrive planted directly into it. If the area is going to be lawn or garden, cap the compacted fill with 4 to 6 inches of real topsoil before seeding or planting. Skip this step and you'll be fighting poor drainage and stunted growth for seasons.
If you're filling a large low area, order fill dirt for the bulk of the depth and reserve topsoil only for the top few inches where roots actually live. This keeps the job cost efficient since fill dirt is cheaper structural material and topsoil is the finishing layer, not the whole fix. Doing it in that order also compacts more predictably than mixing the two.
Atwater sits at 151 feet elevation on mostly flat valley ground, so water doesn't run off on its own, it pools wherever the grade dips. Homeowners here use fill dirt to bring low yards, pool decks, and foundation perimeters up to a working grade before anything else gets built. The native sandy loam compacts reasonably well once fill is added on top, but the fill itself still needs to be placed and compacted in lifts or you'll get settling for years. This is job dirt, not garden dirt, so it gets capped with topsoil wherever grass or plants are going in.
Fill dirt is inorganic subsoil sold for volume and grade, not for growing. Small rocks and bits of stick or root are normal in the mix. It compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.
Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.
Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.
