About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs go 6 to 12 inches deep depending on how low the area is. For a 10 by 10 foot low spot, figure roughly 2 cubic yards at 6 inches or closer to 4 at a full 12 inches. Measure the low area first, then decide on depth based on how much you need to raise the grade.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Baton Rouge Fill Dirt Delivery

Baton Rouge Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs go 6 to 12 inches deep depending on how low the area is. For a 10 by 10 foot low spot, figure roughly 2 cubic yards at 6 inches or closer to 4 at a full 12 inches. Measure the low area first, then decide on depth based on how much you need to raise the grade.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Baton Rouge Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a cap of topsoil once the grade is where it needs to be, since fill dirt itself is not meant to grow anything. If the finished area will see grass or a garden bed, plan for a topsoil layer on top, and consider crushed stone or gravel nearby if the project also involves a drainage path or a base for a patio.

Mulch Mound Pro Tip

Never dump fill dirt in one deep pour and walk away. Spread it in 6 to 8 inch lifts and compact each layer before adding the next, especially over Baton Rouge clay, which already holds water and will let an uncompacted fill settle unevenly for years. A hand tamper works for small spots, but rent a plate compactor for anything larger than a flower bed sized area.

Mulch Mound Pro Tip

The most common mistake locally is treating fill dirt as a growing medium. It is subsoil, low in organic matter and often heavier than the topsoil it will sit under. Cap any area that needs grass, shrubs, or a garden with 4 to 6 inches of real topsoil once the fill is compacted and graded, otherwise plants will struggle in dense, poorly drained subsoil all season.

Mulch Mound Pro Tip

If you are filling a large low area, order fill dirt for the bulk of the depth and save topsoil for just the top layer, since topsoil costs more per yard and does nothing structurally underground. This split keeps the job efficient without sacrificing anything the lawn or beds actually need on top.

Grading and Filling in Baton Rouge

Baton Rouge sits at just 56 feet of elevation, and a lot of neighborhoods near the river and the bayous stay wet longer than people expect. The native alluvial clay does not drain fast, so low spots in yards near the Capitol area and older subdivisions tend to pond after storms instead of soaking in. Fill dirt raises that grade so water moves away from the house instead of sitting against the foundation. Because it is subsoil, not topgrade material, it is meant to be compacted and built on, not planted straight into.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil?

No. Fill dirt is subsoil screened of debris, meant to raise grade and provide structural backfill, not to grow anything in. Topsoil has organic matter that supports plant growth. Most projects use fill dirt to build up the base and then cap it with a few inches of topsoil where grass or plants are going in.

Answer

How many cubic yards of fill dirt do I need for my yard?

One cubic yard covers about 54 square feet at a 6 inch depth. Measure your low area's length times width, then decide your target depth, typically 6 to 12 inches for most jobs. A 200 square foot area at 8 inches would need roughly 5 cubic yards.

Answer

Can I fill and grade the whole area in one pass?

Not if you want it to hold. Fill dirt needs to go down in 6 to 8 inch lifts, each one compacted before the next goes on top. Skipping compaction is why filled areas sink and puddle a year or two later, especially in Baton Rouge's clay-heavy soil which already drains slowly.

Answer

Where will the delivery truck place the fill dirt?

The load gets placed at the drop location you specify at checkout, usually the driveway or the closest accessible point to your project area. Delivery day is scheduled at checkout, so make sure the path is clear and there is enough room for the truck to unload without crossing anything fragile.

Answer

Should I use fill dirt or crushed stone to raise a low spot?

Fill dirt is the standard choice for raising grade or backfilling around foundations because it compacts into a stable base and costs less to move in volume. Crushed stone is better where drainage through the material matters, like under a patio base. For a straightforward low spot in the yard, fill dirt capped with topsoil is the usual approach here.

More delivery around Baton Rouge, Louisiana

All Baton Rouge, Louisiana landscape supply