Ordered Dirt. Received Dirt. Would Buy Again.
About this fill dirt
Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Ordered Dirt. Received Dirt. Would Buy Again.
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Fill Dirt Do I Need?
How Much Fill Dirt Do I Need?
One cubic yard covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches, so a low spot or foundation backfill area of 300 square feet at 6 inches needs roughly 5.5 cubic yards. Measure the low area in square feet, decide your depth based on how much you need to raise it, then work backward from the 54 square foot per yard figure at 6 inches. Order by the cubic yard and round up rather than short a lift.
What is a Yard?
What is a Yard?
FAQs
FAQs
Bethpage Fill Dirt Delivery
Bethpage Fill Dirt Delivery
Regular price
$38.00
per
Yard
Regular price
Sale price
$38.00
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local fill dirt, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your fill dirt isn't the quantity or quality you ordered, we'll make it right.
About this fill dirt
Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Ordered Dirt. Received Dirt. Would Buy Again.
How Much Fill Dirt Do I Need?
How Much Fill Dirt Do I Need?
One cubic yard covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches, so a low spot or foundation backfill area of 300 square feet at 6 inches needs roughly 5.5 cubic yards. Measure the low area in square feet, decide your depth based on how much you need to raise it, then work backward from the 54 square foot per yard figure at 6 inches. Order by the cubic yard and round up rather than short a lift.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Read full review
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Read full review
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Complete Your Outdoor Project
Most fill dirt orders in Bethpage get capped with a few inches of topsoil once the grade is set, especially if the area will see grass or beds. If you are backfilling near a pool or patio, a layer of compactable gravel underneath the fill can help with drainage given how fast this area's sandy loam already moves water. Mulch or stone comes in later, once the ground itself is stable.
Service area
Areas we deliver fill dirt in Bethpage, New York
Mulch Mound Pro Tip
Fill dirt is not something you dump in one shot and walk away from. Build it in 6 to 8 inch lifts and compact each one with a plate compactor or hand tamper before adding the next layer. Skip this on Bethpage's sandy loam and you will get uneven settling within a year, especially near foundations or pool decks where the ground takes on extra load and moisture moves through fast.
Mulch Mound Pro Tip
The most common mistake we see is people trying to plant directly into fill dirt. It is subsoil, not a growing medium, so it lacks the organic content and structure roots need. Always cap finished fill with 4 to 6 inches of real topsoil before seeding, sodding, or planting beds, especially given how quickly Bethpage's existing sandy loam drains and dries.
Mulch Mound Pro Tip
If your project needs both fill and topsoil, order them separately rather than trying to make one material do both jobs. Fill dirt is priced and handled as structural bulk material, topsoil is a finer product meant for root zones. Doing the math on square footage and depth for each layer before ordering saves you from a second delivery mid project.
Grading and Filling in Bethpage
Bethpage sits at a modest 105 feet with sandy loam soil that drains fast but also settles and shifts more than clay ever will. That means backfill around foundations and pool decks needs real compaction, not just dumped and leveled dirt, or you will be chasing sunken spots for years. A lot of the fill work here is tied to homes near Bethpage State Park and older lots that were graded unevenly decades ago. Fill dirt gives you the structural base, then local sandy loam topsoil caps it once you are ready to plant.
What Clean Fill Is
Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.
Fill Dirt vs Topsoil
Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.
Compact in Lifts
Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.