About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide on your target depth, and figure yards from there, doubling the coverage number if you're going a full 12 inches. Because it's sold by the cubic yard, it helps to round up slightly since compaction will settle the material below your finished number.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Bowling Green Fill Dirt Delivery

Bowling Green Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide on your target depth, and figure yards from there, doubling the coverage number if you're going a full 12 inches. Because it's sold by the cubic yard, it helps to round up slightly since compaction will settle the material below your finished number.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Bowling Green Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Fill dirt is structural, not a growing medium, so most jobs finish with a cap of topsoil once the grade is set and compacted. If the area will see foot traffic or drainage, some customers add gravel as a base layer before the fill for extra stability. Pairing fill with topsoil in the same delivery is common when the end goal is a lawn or planting bed.

Map of the fill dirt delivery area around Bowling Green, Kentucky

Service area

Areas we deliver fill dirt in Bowling Green, Kentucky

Mulch Mound Pro Tip

Bowling Green's clay subsoil does not forgive shortcuts. Spread fill dirt in lifts of 6 to 8 inches and compact each layer before adding the next, whether you're using a plate compactor or just tamping by hand for a small area. Dumping a full 12 inches at once and walking away leaves air pockets that settle unevenly for years, especially once winter freeze and thaw cycles work through the clay underneath.

Mulch Mound Pro Tip

The most common mistake we see is treating fill dirt like topsoil and planting straight into it. It's subsoil, screened of debris but not amended, so grass and roots struggle in it directly. Always cap fill with 4 to 6 inches of real topsoil before seeding or planting, and give the fill itself a few weeks to settle after compaction if the timeline allows before you build on top of it.

Mulch Mound Pro Tip

If you're backfilling around a foundation or pool wall, order slightly more fill than the raw volume calculation, since you'll lose some to compaction and to filling gaps around obstructions like pipes or footings. It's more efficient to have a little extra on site than to schedule a second small delivery for the last few feet, especially with Bowling Green's limestone bedrock sometimes limiting how deep you can dig for reference points.

Grading and Filling in Bowling Green

Bowling Green's karst geology means clay and limestone close to the surface, which holds water and makes low spots worse over time instead of better. Fill dirt is how you raise that ground before anything else happens, whether it is leveling a yard that pools water after storms or backfilling around a new foundation. Because the native soil here compacts poorly when wet, a lot of local contractors bring in clean fill rather than reusing what came out of the hole. This matters most before construction season, when frozen or waterlogged clay in winter makes proper compaction almost impossible.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil?

No. Fill dirt is subsoil screened of debris, meant for raising grade and backfilling, not for growing anything. Topsoil is the nutrient rich layer you plant into. Most projects use fill dirt to build up the base and then cap it with a few inches of topsoil wherever grass, shrubs, or garden beds are going in.

Answer

How many yards of fill dirt do I need for my yard?

One cubic yard covers about 54 square feet at a 6 inch depth. Measure your low area's square footage, decide how deep you need to fill, usually 6 to 12 inches, and scale from there. For a 300 square foot area at 6 inches, you're looking at roughly 5.5 cubic yards.

Answer

When is the best time to bring in fill dirt in Bowling Green?

Fill dirt work is driven by the project, not the season, but drier months make compaction easier since Bowling Green's clay soil gets heavy and hard to work when saturated. Avoid placing and compacting fill right after heavy rain or during winter freeze, since the clay underneath won't compact properly and you'll end up redoing it later.

Answer

Where will the truck place the load and what do I need to prepare?

Our driver places the load at the driveway or staging area you point to, so clear the access path ahead of time and make sure there's enough room for a delivery truck to maneuver and dump. If your site has tight access or a steep grade, mention it when you order so we can plan the drop accordingly.

Answer

Should I get fill dirt or a mix of fill and topsoil for my project?

If you're raising grade, backfilling a foundation, or building up before construction, straight fill dirt is the right call since it's meant to be structural. If the finished area needs to support grass or plants, order fill dirt for the bulk of the depth and a separate topsoil layer, usually 4 to 6 inches, to cap it.

More delivery around Bowling Green, Kentucky

All Bowling Green, Kentucky landscape supply