• Canton OH Fill Dirt Delivery - Mulch Mound
1 1
Canton Fill Dirt Delivery

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural jobs run 6 to 12 inches deep depending on how much grade you need to raise. Measure the low area's length and width, decide your depth, and figure yardage from there rather than guessing. For anything backfilling a foundation or pool wall, plan by volume of the void, not just square footage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Canton Fill Dirt Delivery

Canton Fill Dirt Delivery

4.7
137 reviews
$38.00 per Yard
$38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural jobs run 6 to 12 inches deep depending on how much grade you need to raise. Measure the low area's length and width, decide your depth, and figure yardage from there rather than guessing. For anything backfilling a foundation or pool wall, plan by volume of the void, not just square footage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Canton Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Most fill jobs finish with a few inches of topsoil capping the fill so grass or plantings actually have something to grow in, since fill dirt itself is not a growing medium. If you are regrading a larger area, a layer of coarse gravel underneath in wet spots helps with drainage before the fill goes in. Compaction equipment, even a simple hand tamper, is worth having on site rather than treated as optional.

Canton Soil Delivery
Canton Mulch Delivery
Map of the fill dirt delivery area around Canton, Ohio

Service area

Areas we deliver fill dirt in Canton, Ohio

See All Locations
Mulch Mound Pro Tip

Clay loam like Canton's does not forgive shortcuts on compaction. Place fill in lifts no deeper than 6 to 8 inches and compact each one before adding the next, using a plate compactor for anything more than a small patch job. Skipping this step is the single biggest reason yards develop dips and soft spots two or three years after a fill job, especially once winter freeze and spring thaw start working on uncompacted soil.

Mulch Mound Pro Tip

Do not plant or seed directly into fill dirt. It is subsoil, stripped of the organic matter that supports root growth, so anything planted straight into it struggles or dies. Always cap finished fill with 4 to 6 inches of topsoil before seeding, sodding, or planting beds. This is the most common mistake on DIY grading jobs, people finish the fill and skip the cap layer entirely.

Mulch Mound Pro Tip

If your project involves both raising grade and improving drainage, order fill dirt for the bulk of the volume and pair it with a thin gravel layer at the base in any spot that stays consistently wet. This keeps your fill yardage focused on structural buildup rather than trying to make fill dirt do a drainage layer's job, which it is not suited for.

Grading and Filling in Canton

Canton sits on clay loam that already drains slowly, so low areas around foundations and pool decks stay soft and wet longer than people expect. Fill dirt gives you a stable base to build up those spots before water finds a new place to sit. With frost reaching into the ground by early October and staying through May, any fill that is not compacted right will heave and settle over that freeze thaw cycle. Homeowners near downtown and the older housing stock around the Hall of Fame area often deal with uneven yards from decades of settling, and proper fill correcting the grade now saves regrading later.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil?

No. Fill dirt is subsoil screened of debris, used for structural buildup like raising grade or backfilling foundations. Topsoil has organic matter and supports plant growth. Most Canton yards need fill dirt to raise the grade first, then a topsoil cap on top wherever grass or plants are going in.

Answer

How much fill dirt do I need for a low spot in my yard?

One cubic yard covers roughly 54 square feet at 6 inches deep. Measure the length and width of your low area, decide how many inches you need to raise it, and calculate yardage from there. For a 10 by 10 foot spot at 6 inches, that is close to 2 cubic yards.

Answer

When is the best time to bring in fill dirt in Canton?

Fill dirt work is project driven rather than seasonal, so it can be done most of the year. That said, working before the ground freezes in early October or after it thaws in May makes compaction easier, since frozen or waterlogged clay loam is harder to tamp down properly.

Answer

Can the delivery truck reach my backyard?

Delivery trucks drop material at the closest accessible point, usually a driveway or curb, since fill dirt is heavy and trucks cannot cross most lawns without damage. If your project is in the backyard, plan on moving material with a wheelbarrow or renting equipment for larger volumes.

Answer

Should I use fill dirt or gravel to raise my yard's grade?

Fill dirt is the right choice for raising grade or backfilling where you eventually want soil or lawn on top. Gravel is better for drainage layers or areas that need to stay firm and permeable, like under a patio base. Many jobs in Canton's clay soil use both, gravel low for drainage, fill dirt above it for grade.

More delivery around Canton, Ohio

All Canton, Ohio landscape supply