• Cape Coral FL Sand Delivery - Mulch Mound
  • Cape Coral FL Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar mixing or paver joint work only calls for a thin 1 to 2 inch layer, so a single yard goes a long way on a typical patio or pool deck job. Larger pool base installs or bigger hardscape projects may need multiple yards, so measure the square footage first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Cape Coral Sand Delivery

Cape Coral Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar mixing or paver joint work only calls for a thin 1 to 2 inch layer, so a single yard goes a long way on a typical patio or pool deck job. Larger pool base installs or bigger hardscape projects may need multiple yards, so measure the square footage first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Cape Coral Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with pavers and block for anyone doing pool decks or seawall cap work around here. If you are bedding pavers rather than mixing mortar, ask about clean chip stone too, since a lot of installers have moved to it because it does not pump or wash out the way sand can under Florida rain.

Cape Coral Soil Delivery
Cape Coral Mulch Delivery
Map of the sand delivery area around Cape Coral, Florida

Service area

Areas we deliver sand in Cape Coral, Florida

See All Locations
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it mixes into workable mortar instead of a gritty, crumbly batch. If you are repairing block or stucco after storm damage, do not substitute a coarser sand to save a trip, the mortar will not bond or trowel the same way and repairs can fail at the seam within a season.

Mulch Mound Pro Tip

A common mistake on pool decks here is using mason sand as the final bedding layer under pavers. It works, but it can migrate and pump out through joints once Florida's heavy rain seasons compact it, leaving pavers uneven. Many installers now bed with clean chip stone instead and keep mason sand strictly for the mortar and joint work it was meant for.

Mulch Mound Pro Tip

Order mason sand and any paver base material in the same delivery when you can, since one combined load costs less in truck trips than staging separate deliveries. If your project spans mortar work and joint sand, both draw from the same pile, so slightly overestimating total yardage by a small margin is cheaper than a second short-load delivery mid job.

Working With Sand in Cape Coral

Cape Coral sits at 7 feet of elevation on naturally sandy ground, so you would think fill sand is everywhere, but mortar work and pool bases need a finer, more uniform grade than what is under your yard. With the yacht club crowd and canal front lots driving a steady stream of dock, seawall, and pool projects, mason sand gets used for setting pavers around pool decks and mixing mortar for block and stucco repair after storm season. It is not a soil amendment here, it is a construction material for a city that builds around water.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular fill sand from my yard here in Cape Coral?

No. Cape Coral sits on naturally sandy ground, but that soil is not washed or screened to a consistent grain size. Mason sand is finer and more uniform, which is what makes it workable for mortar mixing and paver joints. Fill sand from your yard will not perform the same way in either application.

Answer

How many cubic yards do I need for a pool deck paver project?

One cubic yard covers roughly 324 square feet at a 1 inch depth, which is the typical range for joint fill or a bedding layer. Measure your deck's total square footage, decide whether you need 1 or 2 inches, and size your order from there. Most residential pool decks need less than a full yard for joints alone.

Answer

When is the best time to do mortar or paver work in Cape Coral?

Spring through fall is the busy hardscape season here, and with a first frost that does not arrive until January and lasts only two weeks, you have a long working window. Just plan around the summer rainy season, since wet sand is harder to mix into consistent mortar and harder to screed evenly for bedding.

Answer

Where will the sand be dropped on delivery day?

We place the load wherever your driveway or work area allows truck access, typically as close to the work site as possible. Let us know at checkout if your access is tight, canal front lots and gated communities sometimes need advance notice so we can plan the drop spot properly.

Answer

Should I use mason sand or chip stone under my pavers?

Mason sand has traditionally been used as paver bedding, but many local installers now prefer clean chip stone because it does not pump or shift under heavy rain the way sand can. Mason sand still makes sense for mortar mixing and joint filling, it is really the bedding layer choice that has shifted.

More delivery around Cape Coral, Florida

All Cape Coral, Florida landscape supply