About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and that gives you a rough yardage number before you order. For anything going under a slab, deck, or pool, it is worth rounding up rather than down since a shortfall mid-job means a second delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Charlottesville Fill Dirt Delivery

Charlottesville Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and that gives you a rough yardage number before you order. For anything going under a slab, deck, or pool, it is worth rounding up rather than down since a shortfall mid-job means a second delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Charlottesville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Fill dirt is structural, so most jobs cap it with a few inches of topsoil once the grade is where it needs to be, especially if grass or beds are going in over it. If you are backfilling near a foundation or pool wall, some crews layer in crushed stone at the base for drainage before the fill goes in. Either pairing is easy to schedule as a second delivery once you see how the fill settles.

Map of the fill dirt delivery area around Charlottesville, Virginia

Service area

Areas we deliver fill dirt in Charlottesville, Virginia

Mulch Mound Pro Tip

Do not dump fill dirt in one deep pour and walk away. Place it in lifts of 6 to 8 inches and compact each layer before adding the next, whether that is with a plate compactor or just heavy foot and equipment traffic over several days. Skip this step and Charlottesville's clay-heavy ground will settle unevenly over the next year or two, showing up as a dip right where you least want it, like against a foundation or under a walkway.

Mulch Mound Pro Tip

A common mistake is treating fill dirt as a growing medium because it looks like soil. It is subsoil, low in organic matter and not meant to support grass or plants directly. Once your grade is built up and compacted, cap it with 4 to 6 inches of actual topsoil before seeding or planting. Skipping the cap layer is why some regraded yards end up with patchy grass no matter how much fertilizer goes down.

Mulch Mound Pro Tip

If you are backfilling near a foundation or pool wall in this area, pair fill dirt with a base layer of crushed stone for drainage before backfilling, since Charlottesville's clay subsoil already sheds water slowly and standing moisture against a wall is asking for trouble. It costs a bit more upfront but saves you from cracking or heaving issues down the road, especially with our freeze thaw cycles between the October and April frost dates.

Grading and Filling in Charlottesville

Charlottesville sits on clay soil that already holds water longer than most builders want, so when a lot has a low spot it tends to stay wet and soft rather than draining out. Fill dirt gives you a way to raise that grade with a stable base before anything else goes on top. With an elevation around 480 feet and a decent number of hillside and sloped lots near town, people here use it as much for leveling building pads and pool decks as for simple yard grading. It is not something you plant into directly, it is what goes underneath the layer that does.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Charlottesville?

Yes, fill dirt is the right material for raising low ground and building up a grade before finishing with topsoil. Given the clay soil common here, leveling with fill first actually helps water move off the yard instead of pooling. Just plan on capping the finished grade with topsoil if grass or plants are going in.

Answer

How many cubic yards of fill dirt do I need for a low spot about 200 square feet?

At a 6 inch depth, one cubic yard covers about 54 square feet, so 200 square feet needs roughly 3.7 cubic yards. If you are filling deeper, say 12 inches, double that to around 7.5 yards. Round up slightly to account for compaction once the material settles.

Answer

When is the best time to bring in fill dirt before winter?

Since fill dirt is project driven rather than seasonal, the better question is whether you have time to compact it in lifts and let it settle before your first frost around October 15. Getting it placed and compacted a few weeks before ground freeze gives you a more stable base heading into winter.

Answer

Where will the truck place the fill dirt on delivery day?

The driver places the load exactly where you direct on your property, as close to the work area as the truck can safely access. Since fill dirt is dense and heavy, it helps to clear a path and have the drop zone ready, especially on sloped Charlottesville lots where truck access can be tighter.

Answer

Should I get fill dirt or topsoil for my project?

It depends on the job. Fill dirt is structural, meant for raising grade or backfilling, and it is not meant to grow anything in directly. Topsoil is the finishing layer for lawns and beds. Most grading jobs here use fill dirt to build up the base and then cap it with a few inches of topsoil on top.

More delivery around Charlottesville, Virginia

All Charlottesville, Virginia landscape supply