About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a small low spot might only need a yard or two, while backfilling around a pool or foundation wall can run into double digits. Measure the area you're filling in square feet, decide on a depth between 6 and 12 inches depending on how much you're raising the grade, and work backward from the 54 square foot per yard figure at 6 inches. Round up rather than down, since running short mid project means a second delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Cleveland Fill Dirt Delivery

Cleveland Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a small low spot might only need a yard or two, while backfilling around a pool or foundation wall can run into double digits. Measure the area you're filling in square feet, decide on a depth between 6 and 12 inches depending on how much you're raising the grade, and work backward from the 54 square foot per yard figure at 6 inches. Round up rather than down, since running short mid project means a second delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Cleveland Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill dirt jobs finish with a cap of topsoil once the grade is where you want it, since fill alone won't support grass or plantings. If you're backfilling near a foundation, a layer of gravel for drainage before the fill goes in can save headaches later. Either pairs easily with the same delivery scheduling as your fill order.

Mulch Mound Pro Tip

Cleveland clay does not forgive shortcuts. If you dump fill all at once and skip compaction, expect the ground to keep settling for a year or more, sometimes creating a new low spot right where you just fixed one. Place fill in 6 to 8 inch lifts and compact each one with a plate compactor or hand tamper before adding the next layer. It takes longer but it's the difference between a grade that holds and one you're redoing next spring.

Mulch Mound Pro Tip

A common mistake is treating fill dirt like topsoil and trying to plant directly into it. Fill is subsoil, stripped of the organic matter and nutrients that support root growth, so grass seed or plants placed straight into it will struggle or fail. Always cap finished fill with 4 to 6 inches of real topsoil before seeding, sodding, or planting anything, even if the fill looks dark and workable.

Mulch Mound Pro Tip

If you're backfilling near a foundation or retaining wall, pair fill dirt with a bit of gravel at the base for drainage, since Cleveland's clay subsoil already drains poorly and trapped water against a foundation wall causes problems over time. Ordering fill and gravel together on the same delivery saves a second trip and a second minimum load charge.

Grading and Filling in Cleveland

Cleveland sits on dense clay that already drains slowly, so when a yard has a low corner or a spot that pools after rain off Lake Erie's weather systems, fill dirt is how you fix the grade before it becomes a bigger problem. It's common here to bring in fill around foundations after a sump pump project, or to build up a soggy backyard corner before laying topsoil and sod. Because the native clay compacts unevenly, contractors and homeowners alike use fill in measured lifts rather than dumping it all at once. It is not a growing medium, it is the structural layer underneath one.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Cleveland?

Yes, fill dirt is exactly what's used to raise low areas and even out a sloped or uneven yard, which is common on Cleveland's clay soils where drainage issues create soggy spots. Just plan to compact it in layers and cap the finished grade with topsoil if you want grass to grow on top.

Answer

How many cubic yards of fill dirt do I need for a low spot in my yard?

One cubic yard covers about 54 square feet at a 6 inch depth. Measure the square footage of the low area, decide how deep you need to fill it, usually 6 to 12 inches, and use that coverage figure to estimate. A 200 square foot spot at 6 inches deep needs roughly 3.7 cubic yards, so most people round up to 4.

Answer

When is the best time to bring in fill dirt around Cleveland?

Fill dirt work is driven by the project, not the season, so it can be delivered and installed any time the ground isn't frozen or saturated. That said, avoiding the wettest stretches in early spring and working before the first frost around October 1 makes compaction easier and more reliable.

Answer

Where will the fill dirt be placed when it's delivered?

Our truck places the load as close as possible to where you indicate at checkout, typically the driveway or the accessible edge of your property closest to the work area. Make sure there's a clear path at least as wide as a standard dump truck and let us know about any low branches, tight gates, or overhead wires beforehand.

Answer

Should I get fill dirt or topsoil for my project?

If you're raising a grade, backfilling near a foundation, or building up ground before anything else goes in, fill dirt is the right structural material. Topsoil comes after, as a 4 to 6 inch cap once the fill is compacted, since fill dirt itself won't support healthy plant growth on its own.

More delivery around Cleveland, Ohio

All Cleveland, Ohio landscape supply