Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Thanks! We received your request.
Something went wrong. Please try again.
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most paver joint work or mortar mixing only calls for that thin a layer. If you are bedding a larger patio or setting a pool base at closer to 2 inches, figure half that coverage per yard and order accordingly. Because it is sold by the cubic yard, measure your square footage first and work backward from the depth you actually need.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your sand isn't the quantity or quality you ordered, we'll make it right.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most paver joint work or mortar mixing only calls for that thin a layer. If you are bedding a larger patio or setting a pool base at closer to 2 inches, figure half that coverage per yard and order accordingly. Because it is sold by the cubic yard, measure your square footage first and work backward from the depth you actually need.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!
Most jobs using mason sand also need paver base stone or crushed gravel underneath it for a stable foundation, especially on Columbia's clay soil where a compacted base layer matters more than usual. If you are setting a paver patio, a clean chip stone bedding layer is worth considering alongside or instead of sand, since it does not pump or shift the way sand can under regular foot traffic and rain.
Service area
Mason sand and concrete sand look similar but behave differently once wet. Mason sand is finer and more uniform, which is exactly why it works into mortar smoothly for brick and block joints. If you are mixing mortar for a project near the State House's older brick walls or a newer build, do not substitute concrete sand, the coarser grains make the mix harder to trowel and less workable.
A common mistake on Columbia's clay lots is skipping the base layer and bedding pavers straight onto sand over clay soil. Clay holds water, and without a compacted gravel base underneath, sand will shift and settle unevenly after heavy rain. Always build up a proper base course first, then add your sand layer on top, especially with the wetter stretches this region sees spring through fall.
If you are doing paver work, consider clean chip stone instead of sand for the bedding layer. It is increasingly common because it does not pump up through joints under weight the way sand can over time. Save the mason sand specifically for mortar mixing and joint filling, where its fine texture is actually the point, and you will get more mileage out of the yard you order.
Columbia sits on heavy clay, and that clay does not drain the way sand does, which is exactly why sand gets used to build a clean working layer under pavers and pool decks instead of relying on native soil. With a hardscape season that runs spring through fall here, mason sand moves for mortar mixing and joint work on brick projects all over town. It is not a soil amendment, it is a building material, and in a clay heavy city like this the distinction matters when you are planning a patio or walkway base.
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.
