• Columbus GA Sand Delivery - Mulch Mound
  • Columbus GA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical paver joint or pool base job usually needs less than a full yard unless the footprint is large. Mortar mixing projects are sized by bags of cement ratio rather than square footage, so estimate by volume of mix needed, not coverage area. Since it is sold by the cubic yard, round up slightly rather than short an order mid job.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Columbus Sand Delivery

Columbus Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical paver joint or pool base job usually needs less than a full yard unless the footprint is large. Mortar mixing projects are sized by bags of cement ratio rather than square footage, so estimate by volume of mix needed, not coverage area. Since it is sold by the cubic yard, round up slightly rather than short an order mid job.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Columbus Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Mason sand pairs with cement and lime for mortar mixes, and with paver base stone for pool decks and patios common on Columbus properties with clay subsoil. Some crews are shifting paver bedding over to chip stone since it does not pump under freeze thaw cycles, worth asking your installer which base they spec before ordering.

Columbus Soil Delivery
Columbus Mulch Delivery
Mulch Mound Pro Tip

Mason sand for mortar work should stay dry until mixing, and Columbus humidity means bagged or piled sand left uncovered for more than a few days can clump and throw off your water to sand ratio. If you are mixing mortar in the field, keep the pile tarped and only pull what you need for that batch. A wetter than expected mix usually traces back to sand that sat out overnight picking up moisture from the air.

Mulch Mound Pro Tip

A common mistake on pool base jobs is compacting the sand before it is fully leveled, which locks in low spots that show up later as uneven wear on a liner. Screed the sand first with a straight board across form stakes, check it twice, then compact. Rushing this step on clay heavy Columbus lots is the most frequent callback we hear about from pool installers.

Mulch Mound Pro Tip

If your project is paver joints rather than a full base, you likely need far less than a cubic yard, sometimes a few hundred pounds does it. Ordering a smaller delivered quantity still beats bagged sand on cost per pound, but only if your job is big enough to use most of what you order, otherwise bagged material from a local supplier may waste less.

Working With Sand in Columbus

Columbus sits on heavy clay, which is exactly why sand matters here, it drains where the native soil does not. Masons around Fountain City use mason sand for mortar because it mixes smoother than concrete sand and holds a joint line cleanly on brick and block work common in older neighborhoods near downtown. Pool installers use it to shape a base pad before liner or paver work, especially useful given how humid the region stays into fall. With hardscape season running spring through the first frost around November 10, most orders here are tied to a specific build date rather than general yard maintenance.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same thing as regular sand from Columbus hardware stores?

Mason sand is finer and more uniformly graded than the multipurpose or play sand sold in bags locally. That finer grain is what makes mortar workable and lets it pack tightly into paver joints. If a project calls out mason sand specifically, using a coarser bagged sand instead can weaken the mix or leave gaps in joint lines.

Answer

How much sand do I need for a paver patio joint fill in Columbus?

At 1 inch depth, one cubic yard covers about 324 square feet, but joint fill uses a fraction of that since sand only fills the gaps, not the whole surface. For a typical 200 to 400 square foot patio, most orders run well under a full cubic yard. Measure your patio footprint and we can help size it down.

Answer

When is the best time to install a sand base for a pool or patio here?

Spring through fall is peak hardscape season in Columbus, before the first frost around November 10 makes ground work harder. Avoid installing right after heavy rain since clay subsoil holds water longer here, and a soaked base compacts unevenly. Aim for a dry stretch of a few days before and after your pour.

Answer

Where will the sand be dropped on delivery day?

The driver places the load at the driveway or curb location you specify during checkout scheduling. Make sure the drop zone is clear of vehicles and low hanging branches, and put down a tarp if you want to protect concrete or asphalt from staining, since mason sand can leave a residue.

Answer

Should I use mason sand or chip stone under my pavers?

Mason sand is the traditional choice and still works fine for most residential jobs, but some installers now prefer clean chip stone for paver bedding because it does not pump or shift under freeze thaw cycles the way sand can. If you are working with a contractor, ask which base they spec before ordering material.

More delivery around Columbus, Georgia

All Columbus, Georgia landscape supply