• Detroit MI Sand Delivery - Mulch Mound
  • Detroit MI Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

This sand covers about 324 square feet at a 1 inch depth per cubic yard, and most mortar or joint work only needs 1 to 2 inches. For a typical patio joint fill job of a few hundred square feet, a single cubic yard often does the work, but pool base or mortar mixing projects should be measured out separately since the sand gets consumed differently.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Detroit Sand Delivery

Detroit Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

This sand covers about 324 square feet at a 1 inch depth per cubic yard, and most mortar or joint work only needs 1 to 2 inches. For a typical patio joint fill job of a few hundred square feet, a single cubic yard often does the work, but pool base or mortar mixing projects should be measured out separately since the sand gets consumed differently.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Detroit Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Most jobs pairing this sand also need pavers or natural stone on top, plus a compacted base layer underneath if you're building from scratch. Some Detroit crews are shifting paver bedding over to clean chip stone since it doesn't pump the way sand can under freeze thaw pressure, so ask which base fits your project before you order.

Detroit Soil Delivery
Detroit Mulch Delivery
Map of the sand delivery area around Detroit, Michigan

Service area

Areas we deliver sand in Detroit, Michigan

See All Locations
Mulch Mound Pro Tip

Because this sand is finer than concrete sand, it packs into paver joints more tightly, which matters in Detroit where freeze thaw cycles heave loose joints apart over a winter. Sweep it in dry, then compact with a plate tamper before a light misting of water, repeating once more to fully settle the joints. Skipping the second pass is the most common reason joints open up again by the following spring.

Mulch Mound Pro Tip

A lot of crews still spec this sand for paver bedding out of habit, but it's increasingly being replaced by clean chip stone for that specific use because sand can pump up through joints under repeated freeze thaw pressure. If you're building a paver patio meant to last through Michigan winters, ask about chip stone for the bedding layer and save this sand strictly for joint fill and mortar.

Mulch Mound Pro Tip

If your project includes both mortar mixing and paver joint work, order the full estimated volume in one delivery rather than two smaller ones. It's more efficient to stage one pile on site and pull from it as the job progresses, and you avoid a second delivery fee for a partial yard you could have ordered up front.

Working With Sand in Detroit

Detroit sits on sandy clay, which drains slower than a straight sandy soil and holds moisture into spring. That means hardscape crews here are often working around a wetter subgrade than they'd like, especially near the river flats close to downtown. This sand is not a base material, it is a joint and mortar sand, so its job is to lock pavers together or make mortar workable, not to fix drainage. With freeze thaw cycles common through a Michigan winter, tight paver joints packed with this sand matter more here than in milder climates.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, mason sand is another name for this same washed, finely screened sand. Some suppliers use that term more in southern markets, but the material is identical, fine and uniform enough for mortar mixing and tight paver joints.

Answer

How much sand do I need for a paver patio joint fill?

At 1 inch depth, one cubic yard covers about 324 square feet, so a 300 square foot patio typically needs just under a full yard for joint fill alone. Mortar mixing or pool base work uses sand differently, so measure those separately if your project includes both.

Answer

When is the best time to do this kind of work in Detroit?

Spring through fall is peak hardscape season here, with most crews avoiding install work once temperatures drop toward the first frost around October 1. Working before the ground freezes gives mortar and joint sand time to set properly without a cold snap interfering.

Answer

Where will the sand be placed on delivery day?

The truck places the pile wherever you direct, typically a driveway or a spot close to your work area, at scheduling you'll confirm access details. Make sure the drop zone is clear of cars, gates, or low branches so the delivery goes smoothly.

Answer

Should I use this sand or chip stone for paver bedding?

For paver bedding specifically, many Detroit crews are moving toward clean chip stone since it resists pumping under freeze thaw cycles better than sand. This sand is still the right choice for joint fill, mortar mixing, and pool base work where its fine, uniform texture is an advantage.

More delivery around Detroit, Michigan

All Detroit, Michigan landscape supply