About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

At a 1 inch depth, one cubic yard of mason sand covers about 324 square feet, and at the more typical 2 inch install depth for joint work or bedding that drops to roughly 162 square feet. Sand weighs in at 1.35 tons per cubic yard, so a full-size pickup can handle a partial yard but larger patios or mortar batches usually call for a full delivered yard. Measure your project area first, then match it against the depth you actually need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Fort Leonard Wood Sand Delivery

Fort Leonard Wood Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

At a 1 inch depth, one cubic yard of mason sand covers about 324 square feet, and at the more typical 2 inch install depth for joint work or bedding that drops to roughly 162 square feet. Sand weighs in at 1.35 tons per cubic yard, so a full-size pickup can handle a partial yard but larger patios or mortar batches usually call for a full delivered yard. Measure your project area first, then match it against the depth you actually need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Fort Leonard Wood Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, brick, and block on the same job, and a lot of our Fort Leonard Wood customers order it alongside gravel or crushed stone for base layers under patios and walkways. If you are mixing mortar on site, having both sand and your masonry units delivered together saves a trip.

Map of the sand delivery area around Fort Leonard Wood, Missouri

Service area

Areas we deliver sand in Fort Leonard Wood, Missouri

Mulch Mound Pro Tip

Mason sand is more uniform and finer than concrete sand, which is exactly why it mixes into workable mortar rather than a gritty, hard-to-spread mix. If you are doing brick or block work around post housing, do not substitute concrete sand thinking it is close enough, the joint finish and workability will suffer and you will notice it in the tooling.

Mulch Mound Pro Tip

A common mistake is using mason sand as paver bedding out of habit. It shifts and does not compact the way clean chip stone does under a paver base, and with Fort Leonard Wood's silt loam subsoil holding moisture longer than sandy ground, a poor bedding layer will settle unevenly within a season or two.

Mulch Mound Pro Tip

If your project needs both a base layer and mortar work, order chip stone for the base and mason sand separately for the mortar batch, do not try to make one material do both jobs. Buying the right material for each layer costs less in labor down the line than redoing a section that settled wrong.

Working With Sand in Fort Leonard Wood

Fort Leonard Wood sits on silt loam soil, which drains slowly compared to sandier ground, so a lot of the sand work here is corrective, building a stable base under pavers or a pool rather than fighting native soil. With a growing season bounded by an April 15 last frost and an October 20 first frost, most sand jobs cluster in that window when crews are also pouring flatwork near post housing and the Mahaffey Museum area. Mason sand's uniform grain size makes it the material of choice for mortar work on the brick and block construction common around the installation. It is not the material you want for paver bedding anymore, chip stone handles that better here, but for mortar and joint filling it still does the job right.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand for a paver patio base?

No, mason sand is finer and more uniform, which is great for mortar but not ideal for paver bedding, it does not compact and drain the way chip stone does. Most crews in this area now use clean chip stone under pavers and save mason sand for mortar mixing and joint filling.

Answer

How many cubic yards do I need for a mortar job at Fort Leonard Wood?

Mortar volume depends on your mix ratio more than square footage, but for reference, one cubic yard covers about 324 square feet at a 1 inch depth if you are using it for joint filling or a shallow bedding layer. For straight mortar mixing, estimate based on your batch recipe and brick or block count.

Answer

When is the best time to schedule a sand delivery here?

Most hardscape and masonry work happens between the last frost around April 15 and the first frost around October 20, so spring through fall is when most orders come in. You can order outside that window, just plan for slower curing times on mortar in cooler weather.

Answer

Do you deliver sand onto post or near restricted access areas?

We deliver to accessible driveways and job sites throughout the Fort Leonard Wood area, just make sure the drop location has clear truck access. If your site has gate restrictions or narrow access, let us know the details when scheduling so the driver knows what to expect.

Answer

Should I use mason sand or concrete sand for my project?

Mason sand is finer and more uniform, made for mortar mixing and paver joint filling where workability matters. Concrete sand is coarser and better suited to structural mixes. If you are doing brickwork or joint sand for a patio, mason sand is the right call.

More delivery around Fort Leonard Wood, Missouri

All Fort Leonard Wood, Missouri landscape supply