• Frederick MD Sand Delivery - Mulch Mound
  • Frederick MD Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar or joint work only needs that shallow layer. Pool base applications sometimes call for closer to 2 inches, which cuts your coverage roughly in half, so measure your base area first. For small paver joint jobs, even a partial cubic yard often covers more ground than people expect once it is swept in.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Frederick Sand Delivery

Frederick Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar or joint work only needs that shallow layer. Pool base applications sometimes call for closer to 2 inches, which cuts your coverage roughly in half, so measure your base area first. For small paver joint jobs, even a partial cubic yard often covers more ground than people expect once it is swept in.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Frederick Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Sand pairs naturally with paver stone or brick for patios and walkways, and with portland cement for anyone mixing mortar on site. If you are setting a pool base, a layer of crushed stone underneath for drainage is worth considering before the sand goes down. Crews doing repointing work often order sand alongside masonry sealer for the finishing pass.

Frederick Soil Delivery
Frederick Mulch Delivery
Map of the sand delivery area around Frederick, Maryland

Service area

Areas we deliver sand in Frederick, Maryland

See All Locations
Mulch Mound Pro Tip

If you are repointing stone or brick on an older Frederick property, do not substitute concrete sand for mason sand even though they look similar in the yard. Concrete sand has coarser, irregular grains that make mortar stiff and hard to tool into a clean joint. The finer, more uniform grain in washed mason sand is what lets you strike a smooth, consistent joint line, which matters on visible historic masonry.

Mulch Mound Pro Tip

A common mistake on pool base jobs is skipping compaction and just raking sand flat. Even at a 1 to 2 inch depth, sand needs to be dampened and tamped before the liner goes down, otherwise it settles unevenly under weight and you get wrinkles or low spots within a season. Budget extra time for this step rather than rushing straight to installation.

Mulch Mound Pro Tip

For paver joints specifically, many installers are moving away from sand toward clean chip stone because sand pumps out from between pavers over time, especially with our freeze thaw cycles. If long term joint stability matters more than upfront cost, ask about chip stone for that specific application and save the sand for mortar or pool base work instead.

Working With Sand in Frederick

Frederick sits on clay loam that drains slowly, which is exactly why sand matters for anything with a footing or a base. Pool installers and mortar crews here need a material that will not shift or clump the way native soil does when it gets wet. This sand is washed and screened finer than concrete sand, which is what makes mortar workable when you are pointing stone foundations common in older Frederick homes. It also handles the freeze thaw cycles between our April and October frost dates without breaking down.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened natural sand, sometimes called mason sand in other regions. It is finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and gives you a clean, tight joint on brick or stone work.

Answer

How much sand do I need for a small paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which is typical for paver joint work. Measure your patio square footage and you will likely find a fraction of a cubic yard covers the joints, since only the gaps between pavers need filling, not the full surface.

Answer

When is the best time to install sand for hardscape projects in Frederick?

Spring through fall is when most hardscape work happens here, once the ground has fully thawed after our mid April last frost. Working sand into joints or bases in freezing conditions makes it harder to compact evenly, so most crews avoid installation right around our October first frost date.

Answer

Where will the sand be placed on delivery day?

We place the load at whatever driveway or access point you specify during checkout. Let us know ahead of time if there is a slope, a narrow gate, or overhead wires near the drop site so the truck can plan its approach.

Answer

Should I use sand or chip stone under my pavers?

Sand is still standard for mortar mixing and pool bases, but many installers now use chip stone for paver bedding since it does not pump out from joints over time. If your project is specifically paver joints or bedding, ask about chip stone. For mortar work or pool bases, sand is still the right call.

More delivery around Frederick, Maryland

All Frederick, Maryland landscape supply