• Frisco TX Sand Delivery - Mulch Mound
  • Frisco TX Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Tracy Bly
Tracy Bly
Google Review

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for joint fill and bedding work. For mortar mixing, sizing depends more on your mix ratio than square footage, so estimate by the batch rather than by area. Most residential paver or pool deck jobs in Frisco run somewhere between 1 and 3 cubic yards depending on scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Frisco Sand Delivery

Frisco Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Tracy Bly
Tracy Bly
Google Review

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for joint fill and bedding work. For mortar mixing, sizing depends more on your mix ratio than square footage, so estimate by the batch rather than by area. Most residential paver or pool deck jobs in Frisco run somewhere between 1 and 3 cubic yards depending on scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Frisco Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Tracy Bly
Tracy Bly

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

Google Review
Eric Waller
Eric Waller

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a ni...

Read full review

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

Google Review
William Schaaf
William Schaaf

This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will b...

Read full review

This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will be a return customer for sure.

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, natural stone, or brick for patios and walkways, and with portland cement for mortar mixes. If you are building on Frisco's clay soil, many crews are now laying chip stone under pavers instead of sand bedding, then still ordering sand separately for joint fill and mortar. Ask us about chip stone if pumping through the joints has been an issue on past jobs.

Frisco Soil Delivery
Frisco Mulch Delivery
Map of the sand delivery area around Frisco, Texas

Service area

Areas we deliver sand in Frisco, Texas

See All Locations
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is what makes it work in mortar. Do not substitute concrete sand if you are mixing mortar for brick or block, the coarser grains throw off workability and bond strength. If you are unsure which you have on site, rub a handful between your fingers, mason sand feels almost like flour compared to concrete sand's gritty texture.

Mulch Mound Pro Tip

A common mistake on Frisco jobs is using straight sand bedding under pavers on top of our black clay without a proper base course underneath. Clay movement through wet and dry cycles can shift a thin sand bed over a few seasons. Many local crews now run a compacted base layer first and use chip stone instead of sand for the bedding layer specifically because it resists washing and pumping when the clay shifts.

Mulch Mound Pro Tip

Order mason sand and any base material together when you can, since a single delivery saves a truck trip and gets everything on site before your crew starts. If your project spans both mortar work and joint fill, order slightly more than your calculated total, sand is inexpensive relative to labor and running short mid job costs more in downtime than material.

Working With Sand in Frisco

Frisco sits on black clay that expands and contracts hard with our wet springs and dry summers, which is exactly why a stable sand base matters under pavers, patios, and pool decks around town. With Toyota Stadium and the surrounding development pushing a lot of new hardscape construction, mason sand sees steady use for mortar mixing and paver joint fill. Zone 8a summers get hot enough that sand stays workable and dry fast between uses, which is good for masons keeping a mix consistent through the day. Just know it is being phased out as paver bedding in favor of chip stone that resists pumping through clay movement.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand I would buy in bags?

Yes, this is washed and finely screened mason sand, the same material sold in bags but delivered in bulk by the cubic yard. It is finer and more uniform than concrete sand, which is why it works for mortar mixing and paver joints. Buying bulk saves you from hauling dozens of bags for anything beyond a small patch job.

Answer

How much sand do I need for paver joints on a 400 square foot patio?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 400 square foot patio would need roughly 1.25 cubic yards for joint fill and bedding combined. Most people round up to 1.5 cubic yards to allow for compaction and touch ups. If you are only filling joints rather than bedding the whole area, you will use less.

Answer

When is the best time to schedule a hardscape sand delivery in Frisco?

Spring through fall is peak hardscape season here, when temperatures and ground conditions make paver and patio work easiest. Sand itself installs fine any time of year, but scheduling around the wetter spring stretch helps avoid working sand into muddy clay. Delivery is scheduled at checkout whenever you are ready to build.

Answer

Where will the sand be dropped and do I need a special access point?

The truck places the load wherever you direct on delivery day, ideally a flat, accessible spot near your work area since sand is heavy to move by hand. If your driveway or yard has tight access, let us know your setup ahead of time so we can plan the drop appropriately.

Answer

Should I use sand or chip stone under my pavers?

Mason sand still works for paver bedding, but chip stone is increasingly common in Frisco because it resists pumping and washout when clay soil shifts through wet and dry cycles. Sand remains the right call for joint fill and mortar mixing regardless. If you are unsure which fits your project, tell us the scope and we can point you the right direction.

More delivery around Frisco, Texas

All Frisco, Texas landscape supply