• Grand Rapids MI Sand Delivery - Mulch Mound
  • Grand Rapids MI Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and bedding work only needs 1 to 2 inches, so a small paver patio or mortar batch job might only need a fraction of a yard. For larger patios or pool base prep, figure your square footage against that 324 number and round up, since running short mid project means a delivery delay you do not want during peak hardscape season.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Grand Rapids Sand Delivery

Grand Rapids Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and bedding work only needs 1 to 2 inches, so a small paver patio or mortar batch job might only need a fraction of a yard. For larger patios or pool base prep, figure your square footage against that 324 number and round up, since running short mid project means a delivery delay you do not want during peak hardscape season.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Grand Rapids Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with paver base gravel or chip stone for the structural layers underneath, and with polymeric jointing sand if you are finishing paver joints rather than using loose sand alone. If you are mixing mortar on site, you will also want your cement and lime on hand before the load arrives so you are not storing wet sand longer than necessary.

Grand Rapids Soil Delivery
Grand Rapids Mulch Delivery
Map of the sand delivery area around Grand Rapids, Michigan

Service area

Areas we deliver sand in Grand Rapids, Michigan

See All Locations
Mulch Mound Pro Tip

If you are mixing mortar in Grand Rapids in the shoulder seasons, keep your sand covered and dry before use, since a wet spring or a surprise fall rain changes your water ratio and throws off workability fast. Uncovered piles left out during a rainy stretch near last frost in May can hold moisture for days, which matters more with mason sand than with coarser material because its fine grain holds water longer.

Mulch Mound Pro Tip

A common mistake with paver joints is assuming sand alone will hold up long term in a zone 6a freeze thaw cycle. Loose mason sand tends to migrate or pump out of joints after a few winters here, which is why more local paver crews now use chip stone or polymeric sand for the joint layer and save straight mason sand for mortar mixing and pool base work instead.

Mulch Mound Pro Tip

Order your full estimated quantity in one delivery rather than topping off later, since a second small delivery costs you the same trip fee as a full load. If your project spans both mortar work and paver joints, order slightly more than the calculator suggests, since spillage and leveling always eat into your working supply.

Working With Sand in Grand Rapids

Grand Rapids sits on sandy loam soil, which means your yard already drains reasonably well, but that does not help you when you are mixing mortar or setting pavers, where you need a controlled, uniform sand rather than whatever is under your topsoil. Mason contractors here still lean on this finer sand for workability in mortar joints, though a lot of paver crews have shifted to chip stone for bedding since it does not pump up through the joints the way sand can after a hard freeze thaw cycle. With our zone 6a winters, that freeze thaw movement is real, so material choice on bedding matters more here than in milder climates.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical Grand Rapids project?

It is mainly used for mixing mortar, filling paver joints, and building a leveling base under pools. Its fine, uniform grain makes it easier to work with than coarser concrete sand, especially for mortar where consistency affects strength and workability.

Answer

How many cubic yards do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth. Measure your patio square footage, divide by 324, and round up slightly to account for compaction and spillage during install.

Answer

When is the best time to install with sand around here?

Hardscape projects run heaviest from spring through fall once the ground has thawed after last frost in early May. Working before your first frost in October gives mortar and jointing material time to cure and settle before winter freeze thaw cycles start.

Answer

Where will the delivery truck place the sand?

The driver places the pile wherever you direct on a flat, accessible surface, ideally your driveway or a paved area near your project. Delivery timing is scheduled at checkout, so just make sure the drop spot is clear and reachable before your date arrives.

Answer

Should I use mason sand or chip stone for my paver joints?

Many local paver crews now prefer chip stone for joints since it resists pumping out during our freeze thaw winters, while mason sand remains the better choice for mortar mixing and pool base leveling where its fine, workable texture matters most.

More delivery around Grand Rapids, Michigan

All Grand Rapids, Michigan landscape supply