About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard covers about 54 square feet at a 6 inch depth, which is the shallow end of a typical 6 to 12 inch install. A low spot of 300 square feet at 8 inches deep runs somewhere around 7 cubic yards, so measure the area first and decide your target depth before ordering. Because it is sold and delivered by the cubic yard, rounding up slightly costs less than a second delivery trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Green Bay Fill Dirt Delivery

Green Bay Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard covers about 54 square feet at a 6 inch depth, which is the shallow end of a typical 6 to 12 inch install. A low spot of 300 square feet at 8 inches deep runs somewhere around 7 cubic yards, so measure the area first and decide your target depth before ordering. Because it is sold and delivered by the cubic yard, rounding up slightly costs less than a second delivery trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Green Bay Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a few inches of topsoil capping the fill so grass or plants have something to actually grow in, since fill dirt itself is not meant to support root growth. If the finished grade will see foot traffic or drainage work, a layer of gravel underneath sometimes helps before the fill goes in. Compaction equipment, even a hand tamper for smaller jobs, matters more than any material choice.

Mulch Mound Pro Tip

Do not dump fill dirt in one deep pour and walk away. In Green Bay's clay, an uncompacted 12 inch fill can settle 2 to 3 inches over its first winter as freeze thaw cycles work through it. Place it in 6 to 8 inch lifts and compact each one with a plate tamper or hand tamper before adding the next layer. Skipping this step is the single biggest reason fill jobs need redone a year later.

Mulch Mound Pro Tip

Fill dirt is not soil for planting, it is structural material, and treating it like topsoil is the most common mistake we see. Cap your compacted fill with 4 to 6 inches of actual topsoil before seeding or laying sod. If you backfill against a foundation, keep the final grade sloped away from the house so Green Bay's clay does not trap water against the wall over winter.

Mulch Mound Pro Tip

If you are filling a large low area, consider using fill dirt for the bulk of the depth and reserving topsoil only for the top few inches where roots actually need it. This costs less overall than filling the whole depth with topsoil and performs the same structurally. Pair the order with gravel underneath if the area will handle drainage or foot traffic, since gravel manages water better than compacted clay fill alone.

Grading and Filling in Green Bay

Green Bay sits on dense clay that already drains poorly, so a lot of fill work here is about correcting grade so water moves away from foundations instead of pooling against them. With frost pushing down through October to May and a 5a winter that freezes and heaves ground, uncompacted fill will settle and crack whatever sits on top of it by spring. Homeowners near Lambeau and older neighborhoods with settled foundations use fill dirt to build back up before repouring walkways or patios. This is not a growing medium, it is the structural layer clay soil around here often needs before anything else goes in.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Green Bay?

Yes, fill dirt is the right material for raising low areas or leveling grade, especially over our clay soil that tends to hold water in low spots. Place it in compacted 6 to 8 inch lifts rather than one deep pour, and cap the finished grade with topsoil if you plan to seed or sod over it.

Answer

How many cubic yards do I need to fill a 200 square foot low spot?

At a 6 inch depth, one cubic yard covers about 54 square feet, so 200 square feet needs roughly 3.7 cubic yards, round up to 4. If you're going deeper, say 10 inches, plan closer to 6 cubic yards, since coverage drops as depth increases.

Answer

When is the best time to bring in fill dirt before winter hits?

Get fill work done before ground starts freezing in early October, since compacting frozen or partially frozen clay is difficult and unreliable. Spring after the last frost around May 10 also works well, giving the fill a full season to settle before winter freeze thaw cycles test it.

Answer

Will the delivery truck be able to access my property?

Most residential driveways and yards work fine for a full size delivery truck, but the driver needs a clear path with enough width and overhead clearance. Delivery is scheduled at checkout, and it helps to mark your drop location and clear low branches or parked cars ahead of time.

Answer

Should I get fill dirt or topsoil for my project?

Use fill dirt for the structural bulk of any job, like raising grade or backfilling, since it is denser and cheaper for filling volume. Reserve topsoil for the top 4 to 6 inches where you actually need plants or grass to grow, since fill dirt alone will not support root growth well.

More delivery around Green Bay, Wisconsin

All Green Bay, Wisconsin landscape supply