About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, so a small patio or paver joint job often only needs a fraction of a yard. For mortar mixing, order based on your mix ratio rather than square footage, since you are measuring by volume per batch. Most residential hardscape projects in Harrisonburg run somewhere between half a yard and two yards depending on scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Harrisonburg Sand Delivery

Harrisonburg Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, so a small patio or paver joint job often only needs a fraction of a yard. For mortar mixing, order based on your mix ratio rather than square footage, since you are measuring by volume per batch. Most residential hardscape projects in Harrisonburg run somewhere between half a yard and two yards depending on scope.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Harrisonburg Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with paver base stone and edge restraints on most patio and walkway jobs, and with mortar mix and brick or block for masonry work around older Harrisonburg homes. If you are setting a pool, a layer of gravel underneath the sand base helps with drainage before the sand goes down.

Map of the sand delivery area around Harrisonburg, Virginia

Service area

Areas we deliver sand in Harrisonburg, Virginia

Mulch Mound Pro Tip

If you are bedding pavers, know that plain sand is increasingly being swapped out for clean chip stone in this region, because chip stone locks together and does not pump up through the joints the way sand can under freeze thaw cycles. With Harrisonburg's clay-heavy ground and real winter freezes, that pumping risk is higher than in milder climates. Sand still works fine for jointing and mortar, just think twice before using it as your only bedding layer.

Mulch Mound Pro Tip

Time hardscape sand deliveries around Harrisonburg's frost window, which runs roughly October 10 to April 25. Setting pavers or laying mortar joints when the ground is actively freezing and thawing invites shifting before the material has a chance to settle. Spring after the last frost and early fall before the first frost are the two windows local crews rely on most.

Mulch Mound Pro Tip

Buying sand by the cubic yard instead of in bags almost always works out better once a project passes even a modest size, and it cuts down on the plastic waste that bagged product leaves behind. If your job also needs paver base or gravel, ask about scheduling both in the same delivery window, since combining loads saves a second trip to the property.

Working With Sand in Harrisonburg

Harrisonburg sits on limestone clay that drains slowly and holds moisture longer than sandy soils do, which is exactly why this sand matters for hardscape work here. It gives mortar the fine, uniform texture needed to stay workable while masons set stone or block around campus and downtown properties. For paver joints, it locks in tight without the puddling problems that heavier clay backfill can cause nearby. Pool base work also benefits from the consistent grain size, since a level, stable bed matters more once the surrounding clay starts to shift with the seasons.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, in this region the term mason sand refers to the same washed, finely screened natural sand described here. It is the standard choice for mortar mixing and paver joints, and it is finer and more uniform than concrete sand, which is what makes it workable for masonry.

Answer

How much sand do I need for a paver patio joint fill?

Joint fill uses very little material compared to bedding layers, often well under a quarter yard for an average patio, since you are only filling narrow gaps between pavers rather than covering the whole surface. One cubic yard covers about 324 square feet at a 1 inch depth, so measure your joint area accordingly.

Answer

When is the best time to install pavers or do masonry work in Harrisonburg?

Spring through fall is the active hardscape season here, with the window between the last frost around April 25 and the first frost around October 10 giving the most reliable working conditions. Working outside that window risks the ground shifting under fresh mortar or bedding before it settles.

Answer

Where will the sand be dropped on my property?

You choose the drop location at checkout, typically the driveway or the curb closest to your work area. Make sure the path is clear for the truck and consider laying down a tarp or plywood if you want to protect the surface underneath the pile.

Answer

Should I use sand or chip stone under my pavers?

For jointing and mortar work, sand is still the standard and works well. For the bedding layer under the pavers themselves, many contractors are shifting to clean chip stone instead, since it locks together and resists pumping up through joints during freeze thaw cycles, which matters given Harrisonburg's winter conditions.

More delivery around Harrisonburg, Virginia

All Harrisonburg, Virginia landscape supply