About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most projects here run 6 to 12 inches depending on how much grade change you're correcting. Measure the low area's length and width, decide your target depth, and order in cubic yards from there. If you're backfilling around a foundation or pool, factor in the full depth of the gap, not just the visible surface.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Jacksonville Fill Dirt Delivery

Jacksonville Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most projects here run 6 to 12 inches depending on how much grade change you're correcting. Measure the low area's length and width, decide your target depth, and order in cubic yards from there. If you're backfilling around a foundation or pool, factor in the full depth of the gap, not just the visible surface.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Jacksonville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a cap of topsoil once the fill dirt is compacted to grade, especially anywhere grass, beds, or sod are going in. If you're building up a large low spot, some customers also bring in a base layer of crushed rock for extra stability before the fill goes on. Mulch or sod comes last, once the ground underneath is solid and settled.

Mulch Mound Pro Tip

Place fill dirt in lifts of 6 to 8 inches and compact each one before adding the next, don't dump the whole depth at once and call it done. In Jacksonville's sandy ground, uncompacted fill will keep settling for a year or more, especially after summer rain soaks in and works its way down through loose material. A plate compactor rented for an afternoon saves you a sunken yard later.

Mulch Mound Pro Tip

The most common mistake we see is treating fill dirt like topsoil and planting straight into it. It has no nutrient value and often compacts too hard for roots to push through once it settles. Always cap finished, compacted fill with 4 to 6 inches of real topsoil before grass or beds go in, otherwise you'll be fighting bare patches within a season.

Mulch Mound Pro Tip

If you're raising a large section of yard, mixing a rock base for the bottom layer with fill dirt above it holds up better long term than fill alone, particularly on the sandy, water-table-close ground common here at low elevation. It costs a bit more upfront but you avoid re-grading the same spot again after the next rainy season.

Grading and Filling in Jacksonville

At 16 feet of elevation with sandy soil underneath, a lot of Jacksonville lots hold water longer than people expect after summer storms, and fill dirt is how you build the ground up above that problem instead of fighting it every rainy season. It's common here to see homeowners raising a low corner of the yard, backfilling around a new pool shell, or bringing a slab site up to grade before construction. Because the native soil is sandy, fill dirt compacts differently than it would on clay, so lift thickness and compaction matter more than people assume. This is structural material, it does the heavy lifting, then topsoil goes on top for anything that needs to grow.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to raise a soggy spot in my Jacksonville yard?

Yes, that's one of the most common uses we see here, since low elevation and sandy soil mean water sits in yard low spots after storms. Build the area up with compacted fill dirt in 6 to 8 inch lifts, then cap with topsoil once you're at grade. It won't fix drainage on its own, but raising the ground above the water line solves most of the problem.

Answer

How many cubic yards do I need to fill a 200 square foot low spot?

At a 6 inch depth, one cubic yard covers about 54 square feet, so 200 square feet needs roughly 3.7 cubic yards, call it 4 to allow for compaction settling. If you're going deeper, say 12 inches, double that to around 7.5 cubic yards. Always round up rather than order short.

Answer

Do I need to compact fill dirt myself or does it settle on its own?

You need to compact it. Left loose, fill dirt keeps settling for a year or more, especially with Jacksonville's rain patterns working moisture down through it. Spread it in 6 to 8 inch lifts and compact each layer, either by hand tamper for small areas or a rented plate compactor for anything larger. Skipping this step is the top reason people end up with sunken patches later.

Answer

Where will the delivery truck put the fill dirt?

The driver dumps the full load in one pile at a spot you choose, so pick a flat, accessible location close to where you're working before the truck arrives. Make sure there's a clear path for a full size delivery truck to reach that spot. You'll move it from the pile to its final location yourself, so plan for that labor.

Answer

Should I get fill dirt or topsoil for building up my yard?

Fill dirt for the bulk of the job, topsoil only for the top few inches. Fill dirt is subsoil meant for structural mass, it's not a growing medium and has no nutrient content, but it costs less and does the heavy lifting. Cap it with topsoil once you're near final grade if grass, plants, or sod are going in on top.

More delivery around Jacksonville, Florida

All Jacksonville, Florida landscape supply