• Jacksonville NC Sand Delivery - Mulch Mound
  • Jacksonville NC Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Michelle Cooper
Michelle Cooper
Google Review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most mortar or bedding jobs run 1 to 2 inches deep. Measure your paver patio or pool base footprint in square feet, then divide by 324 for a 1 inch layer, or by roughly 160 for 2 inches. Order by the cubic yard and round up slightly, mortar mixing especially eats more than people expect.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Jacksonville Sand Delivery

Jacksonville Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Michelle Cooper
Michelle Cooper
Google Review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most mortar or bedding jobs run 1 to 2 inches deep. Measure your paver patio or pool base footprint in square feet, then divide by 324 for a 1 inch layer, or by roughly 160 for 2 inches. Order by the cubic yard and round up slightly, mortar mixing especially eats more than people expect.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Jacksonville Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Michelle Cooper
Michelle Cooper

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering...

Read full review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were on time, they were able to deliver in 48 hours, they were generous with the portion (we got 9 yards and it felt like a FULL nine yards!), the driver was polite! We have ordered from reputable places, and there is always a little trash in the mulch. The mulch we recv'd from Mulch Mound had barely any... we were pleasant surprised!!! Color was great! Not to mention - the price was competitive and LOWER than other mulch places around. We will use again !! Highly recommend! Thanks Mulch Mound!

Google Review
Rob H
Rob H

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, edging stone, and portland cement for anyone mixing their own mortar on site. If you are building a paver patio, many crews now bed with clean chip stone instead of sand, since chip stone will not pump or wash out the way sand can under coastal rain patterns. Either way, having both a bedding material and jointing sand on hand keeps a hardscape crew from stalling mid install.

Jacksonville Soil Delivery
Jacksonville Mulch Delivery
Map of the sand delivery area around Jacksonville, North Carolina

Service area

Areas we deliver sand in Jacksonville, North Carolina

See All Locations
Mulch Mound Pro Tip

Mason sand mixed for mortar needs a specific ratio, typically three parts sand to one part portland cement for standard mortar. In Jacksonville's humidity, mix in smaller batches than you think you need, since the sand's fine grain holds moisture and can make mortar set unevenly if it sits too long in the wheelbarrow before use. Test workability with a trowel before committing to a full batch.

Mulch Mound Pro Tip

A common mistake is using mason sand as paver bedding and expecting it to stay put long term. Its fine, uniform grain is exactly what makes it workable in mortar, but that same quality lets it migrate and pump under paver joints after heavy coastal rain and freeze thaw cycles near the Nov 10 first frost. If bedding pavers, ask about chip stone instead.

Mulch Mound Pro Tip

Order mason sand and any paver base material in the same delivery when possible, since one truck trip covers both and saves a second scheduling window. If your project spans both mortar work and paver joints, buying a slightly larger quantity of mason sand up front for joint sand use later is usually more efficient than a second small order once the joints are ready.

Working With Sand in Jacksonville

Jacksonville already sits on sandy native soil, but mason sand is a different animal, finer and more uniform, built for mortar and bedding work rather than drainage. Around Lejeune Memorial Gardens and the newer subdivisions off Western Boulevard, we deliver it mostly for hardscape crews setting pavers and block. In this coastal, humid climate, keeping mason sand dry and covered on site matters more than in drier regions, since it can clump if it sits wet before mixing. Zone 8a's long building season means this material moves nearly year round here.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand from a hardware store bag?

No, mason sand is washed and finely screened for consistency, which is what makes it workable in mortar mixes. Bagged sand at hardware stores varies more in grain size and cleanliness. For mortar mixing, paver joints, or a pool base, mason sand delivered by the cubic yard gives you a more predictable, uniform product for the whole job.

Answer

How many cubic yards do I need for a paver patio's joint sand?

Joint sand use is much lighter than bedding, often a fraction of a cubic yard for a typical patio, since it only fills the gaps between pavers. One cubic yard covers about 324 square feet at 1 inch depth, so for joints alone most residential patios need well under a full yard. We can help you estimate based on your paver layout.

Answer

When is the best time to install a paver patio in Jacksonville?

Spring through fall is peak hardscape season here, with the long stretch between the March 25 last frost and Nov 10 first frost giving plenty of workable weather. Mortar and sand set best in moderate temperatures without heavy rain right after installation, so aim for a dry stretch in the forecast when scheduling your pour or paver set.

Answer

Where will the sand be placed on delivery day, and do I need site access?

We place the load wherever you mark on your property, typically a driveway or a spot close to your work area, as long as our truck can access it. Make sure the path is clear of low branches, parked cars, or narrow gates. Steep or soft ground can limit exact placement, so let us know if your site has access challenges.

Answer

Should I use mason sand or chip stone for my paver base?

That depends on your project. Mason sand is the traditional choice and works well for mortar mixing and joint filling, but for paver bedding specifically, many installers now prefer clean chip stone since it resists pumping and washing out over time. If you are unsure which fits your job, we can talk through both options before you order.

More delivery around Jacksonville, North Carolina

All Jacksonville, North Carolina landscape supply