• Johns Creek GA Sand Delivery - Mulch Mound
  • Johns Creek GA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that area at 2 inches, which is the typical install range for joint fill and bedding work. For a standard 300 square foot paver patio, plan on roughly 1 cubic yard if you are filling joints and leveling at the thinner end of that range. Mortar mixing jobs use less per square foot but add up fast on larger block or stone wall projects.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Johns Creek Sand Delivery

Johns Creek Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that area at 2 inches, which is the typical install range for joint fill and bedding work. For a standard 300 square foot paver patio, plan on roughly 1 cubic yard if you are filling joints and leveling at the thinner end of that range. Mortar mixing jobs use less per square foot but add up fast on larger block or stone wall projects.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Johns Creek Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most mason sand orders in Johns Creek go out alongside paver stone or clean chip stone for the base layer underneath, since chip stone has largely replaced sand as a bedding material because it does not pump under clay soil movement. Portland cement is the other common pairing for anyone mixing mortar on site. If you are building a retaining wall, gravel backfill usually comes along for drainage.

Johns Creek Soil Delivery
Johns Creek Mulch Delivery
Map of the sand delivery area around Johns Creek, Georgia

Service area

Areas we deliver sand in Johns Creek, Georgia

See All Locations
Mulch Mound Pro Tip

Mason sand for paver joints should go in dry and be swept, not hosed, into the joints on the first pass. Wetting it too early causes it to clump and leave gaps once it dries and settles. Do a final light misting only after joints are packed and swept clean, then let it sit before any foot traffic. On Johns Creek's clay base, gaps that open later tend to fill with silt from ground movement.

Mulch Mound Pro Tip

A common mistake here is using mason sand as the compacted base layer under a paver patio instead of just the joint fill. Sand alone shifts and pumps over time on clay soil, which is why more installers are switching to clean chip stone for the base and reserving mason sand strictly for joints and mortar work. Ask your installer which layer they mean before ordering quantities.

Mulch Mound Pro Tip

If your project mixes mortar and fills joints, order mason sand as one delivery sized for both uses rather than two separate trips, since it is the same material for each task. Pair it with a chip stone base delivery scheduled the same week if your patio build is sequenced, so both materials are on site when your crew needs them and nothing sits idle.

Working With Sand in Johns Creek

Johns Creek sits on clay soil, which means most hardscape jobs need a real bedding layer rather than relying on native ground. Mason sand fills paver joints tight and gives mortar the workability that concrete sand cannot match, which matters when you are building on a base that shifts with clay's wet and dry swings. With hardscape season running spring through fall here, most orders come in around patio and retaining wall projects near neighborhoods like those bordering Autrey Mill Nature Preserve. It is not a mulch bed material, this is a structural and joint fill product.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand I would buy at a hardware store?

Yes, this is washed and finely screened mason sand, the same fine, uniform product used for mortar mixing and paver joints. It is finer and more consistent than concrete sand, which is what makes it workable for mortar and clean for filling joints without leaving grit visible on the surface.

Answer

How much sand do I need for a 400 square foot patio's joints?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 400 square foot patio needs a bit over one cubic yard for joint fill and light bedding. If you are also mixing mortar for edging or a border wall, add extra based on your mix ratio.

Answer

When is the best time to install paver joints with sand in Johns Creek?

Spring through fall is when most hardscape work happens here, and dry weather is what matters most for sand joint work, since a dry base packs tighter and resists early washout. With Johns Creek's last frost around April 5, late spring through early fall gives the most consistent dry stretches for this kind of finish work.

Answer

Where will the sand be dropped off and do I need to be home?

You choose the drop location, typically a driveway or curbside spot, when you schedule delivery at checkout. You do not need to be home, but the area should be clear and accessible for the truck, and a tarp underneath helps if you want to protect the driveway surface.

Answer

Should I use sand or chip stone as my paver base?

For the structural base layer under pavers, clean chip stone is increasingly preferred over sand because it does not pump or shift the way sand can under clay soil movement common in Johns Creek. Mason sand still has its place for joint fill and mortar mixing, just not as the primary bedding layer anymore.

More delivery around Johns Creek, Georgia

All Johns Creek, Georgia landscape supply