About this fill dirt

Inorganic subsoil for filling holes, raising low ground, and backfill. Small rocks and bits of stick or root are normal in the mix, this is structural material and not a growing medium. Do not use it to level a lawn surface or fill flower beds, put topsoil over it for anything you want to plant. Place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most projects here run 6 to 12 inches deep depending on how low the grade sits. Measure the low area in square feet, decide your depth, and order in cubic yards from there, rounding up rather than down since compaction will settle the lift.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Lake Grove Fill Dirt Delivery

Lake Grove Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Inorganic subsoil for filling holes, raising low ground, and backfill. Small rocks and bits of stick or root are normal in the mix, this is structural material and not a growing medium. Do not use it to level a lawn surface or fill flower beds, put topsoil over it for anything you want to plant. Place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most projects here run 6 to 12 inches deep depending on how low the grade sits. Measure the low area in square feet, decide your depth, and order in cubic yards from there, rounding up rather than down since compaction will settle the lift.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Lake Grove Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most Lake Grove jobs that need fill dirt also need a topsoil cap once the grade is built up, especially if lawn or planting beds go on top. Some pool and foundation projects also pull in gravel for drainage layers underneath the fill. Ordering both at once keeps the job moving instead of stopping between phases.

Mulch Mound Pro Tip

Fill dirt is structural, not a growing medium, so never spread it in one thick pour and call it done. Build it in 6 to 8 inch lifts and compact each one with a plate compactor or hand tamper before adding the next. Skipping this on Lake Grove's sandy loam means the ground keeps settling for a season or two, which shows up later as a sunken patch near a pool deck or foundation wall.

Mulch Mound Pro Tip

The most common mistake on Long Island lots is finishing grade with bare fill dirt and expecting grass to take. It won't, fill dirt is screened subsoil with the organic matter removed, so cap the final lift with 4 to 6 inches of real topsoil before seeding or sodding. Order the topsoil at the same time as the fill so you're not waiting on a second delivery mid project.

Mulch Mound Pro Tip

Time your fill delivery for a dry stretch if you can, since sandy loam handles compaction poorly when saturated and you'll fight mud instead of building a stable base. If your project also needs gravel for drainage under a patio or pool, order it alongside the fill dirt so both loads land in one trip and you're not paying for two separate deliveries to the same driveway.

Grading and Filling in Lake Grove

Lake Grove sits on sandy loam over Long Island's glacial outwash, which drains well but settles unevenly if you backfill with whatever is on hand. That matters most around pool decks, foundation perimeters, and low yard areas near the First Congregational Church of New Village neighborhood where older lots were never properly graded. Fill dirt gives you a dense, debris free base you can compact in stages, which holds up better through Lake Grove's freeze thaw cycle between the Apr 7 last frost and Nov 7 first frost. Cap it with topsoil before anything green goes in.

What Fill Dirt Is

Fill dirt is inorganic subsoil sold for volume and grade, not for growing. Small rocks and bits of stick or root are normal in the mix. It compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I plant directly into fill dirt after it's delivered?

No, fill dirt is subsoil with debris screened out, not a growing medium. It's meant to build up grade and provide a stable structural base. Cap it with 4 to 6 inches of topsoil before seeding, sodding, or planting anything, otherwise you'll get poor germination and uneven growth.

Answer

How many cubic yards of fill dirt do I need for a low spot in my yard?

One cubic yard covers about 54 square feet at 6 inches deep. Measure the square footage of your low area, decide how deep it needs to be filled, usually 6 to 12 inches, and calculate from there. For a 300 square foot area at 8 inches, expect to need roughly 7 to 8 cubic yards.

Answer

When is the best time to bring in fill dirt in Lake Grove?

Fill dirt is project driven, not seasonal, so timing follows your job, not the calendar. That said, working in a dry stretch helps with compaction since Lake Grove's sandy loam gets harder to tamp properly when wet. Avoid filling right before a hard freeze if you need to grade and compact the same day.

Answer

Where will the delivery truck place the fill dirt on my property?

The truck drops the load at the driveway or curb access point you specify when you schedule delivery at checkout. Make sure that spot is clear of vehicles and obstacles, and let us know if there are low branches, tight turns, or narrow access that could affect where the truck can reach.

Answer

What's the difference between fill dirt and topsoil for my project?

Fill dirt is subsoil screened of debris, used for structural jobs like raising grade, backfilling foundations, or building up before planting. Topsoil has organic matter and is meant for growing. If you're filling a low spot and then planting grass, you need fill dirt first and topsoil on top, not one or the other alone.

More delivery around Lake Grove, New York

All Lake Grove, New York landscape supply