About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches. For a typical 300 to 500 square foot patio or walkway job, one to two cubic yards is usually enough, but pool base work at the deeper end of that range will use more per yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Lake Grove Sand Delivery

Lake Grove Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches. For a typical 300 to 500 square foot patio or walkway job, one to two cubic yards is usually enough, but pool base work at the deeper end of that range will use more per yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Lake Grove Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most jobs using this sand also need paver base gravel underneath and edge restraints to lock the pattern in place. If you are pouring mortar, bagged cement is the obvious companion, and some crews are now swapping chip stone in for the sand bedding layer since it will not pump out over time.

Mulch Mound Pro Tip

For mortar mixing in this climate, keep your sand dry until the day you mix it, since Long Island humidity swings can add moisture you do not account for in your ratio. A handful that clumps and holds shape when squeezed is already carrying extra water, which throws off a mortar batch faster than most people expect on a job site.

Mulch Mound Pro Tip

A common mistake with paver joints is sweeping sand in when the pavers are still damp from morning dew, which is frequent here given the coastal humidity. The sand bridges over wet joints instead of settling in, leaving gaps that show up after the first hard rain. Sweep and vibrate joints in the afternoon once surfaces have fully dried.

Mulch Mound Pro Tip

If you are bedding pavers rather than jointing them, consider chip stone instead of this sand for the base layer, since chip stone will not pump up through joints under freeze thaw cycles the way sand can. Save this material for what it does best here, which is mortar mixing and tight paver joint fill, and you will get more consistent results per yard ordered.

Working With Sand in Lake Grove

Lake Grove sits on sandy loam already, so this material blends in visually when it is used for paver joints or bedding rather than fighting the native soil. The zone 7b climate gives a long dry stretch from spring into fall, which is exactly when mortar and jointing sand need to stay workable and dry before use. Because the growing season here runs frost to frost, Apr 7 to Nov 7, most hardscape crews are pouring patios and setting pavers in that same window. Keep bulk sand covered near Lake Ronkonkoma humidity swings so it does not clump before you need it.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened natural sand, which is what people in some regions call mason sand. It is finer and more uniform than concrete sand, which is why it works better for mortar mixing and tight paver joints where a rough texture would be difficult to compact evenly.

Answer

How many cubic yards do I need for a patio?

One cubic yard covers roughly 324 square feet at a 1 inch depth. For most residential patios between 200 and 400 square feet, one cubic yard is often enough for joint filling, though mortar mixing or a deeper bedding layer will use more per square foot.

Answer

When is the best time to install paver joints in Lake Grove?

Spring through fall works best, roughly April through early November based on the local frost dates. Dry afternoons are ideal since damp pavers keep sand from settling properly into the joints, and you want the material fully compacted before winter freeze and thaw cycles begin.

Answer

Where will the sand be dropped on delivery day?

The load is placed at your driveway or job site wherever truck access allows, and delivery is scheduled at checkout rather than a fixed same day promise. Clear a space wide enough for the truck beforehand and let us know if there are tight turns or low branches near the drop spot.

Answer

Should I use sand or chip stone for paver bedding?

Many crews are shifting to chip stone for the bedding layer since it locks together and will not pump out from under pavers over time, unlike sand. This sand is still the better choice for mortar mixing and filling paver joints, where its fine, uniform texture makes it easier to work with than coarser material.

More delivery around Lake Grove, New York

All Lake Grove, New York landscape supply