• Lancaster PA Sand Delivery - Mulch Mound
  • Lancaster PA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Mitch Smouse
Mitch Smouse
Google Review

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of this sand covers roughly 324 square feet at a 1 inch depth, which is the typical range for paver joints and bedding work. Mortar mixing and pool base jobs vary more, so measure your project footprint and depth before ordering, then round up slightly since sand compacts once it is worked. Most residential patio or walkway jobs in Lancaster run somewhere between a quarter yard and a full yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Lancaster Sand Delivery

Lancaster Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Mitch Smouse
Mitch Smouse
Google Review

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of this sand covers roughly 324 square feet at a 1 inch depth, which is the typical range for paver joints and bedding work. Mortar mixing and pool base jobs vary more, so measure your project footprint and depth before ordering, then round up slightly since sand compacts once it is worked. Most residential patio or walkway jobs in Lancaster run somewhere between a quarter yard and a full yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Lancaster Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review
Julie Nekich
Julie Nekich

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...

Read full review

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

Google Review

Complete Your Outdoor Project

Sand pairs naturally with paver base stone and polymeric jointing sand on most patio builds, and with portland cement for anyone mixing their own mortar on site. If you are doing a pool deck or walkway, a load of crushed stone underneath the sand layer gives better long term drainage in Lancaster's silt loam.

Lancaster Soil Delivery
Lancaster Mulch Delivery
Map of the sand delivery area around Lancaster, Pennsylvania

Service area

Areas we deliver sand in Lancaster, Pennsylvania

See All Locations
Mulch Mound Pro Tip

For paver joints, many Lancaster crews are switching to clean chip stone instead of mason sand because it resists pumping and washout during heavy spring rains, which this region gets plenty of. If you're set on sand for joints, make sure it's fully dry before sweeping it in, and compact with a plate vibrator so it locks into the joints rather than settling later and requiring a second pass.

Mulch Mound Pro Tip

A common mistake on mortar jobs is mixing sand that's still damp from sitting outside overnight, which throws off your water ratio and weakens the mix. Cover your pile with a tarp between work sessions, especially during Lancaster's wetter spring stretch, so you're not fighting inconsistent moisture content batch to batch.

Mulch Mound Pro Tip

Order mason sand and paver base stone together when you can, since combining them into one delivery saves a truck trip and gets both materials staged before your crew starts. If your project spans multiple weekends, having the sand covered and the stone down first means you're not waiting on material once good weather hits.

Working With Sand in Lancaster

Lancaster's silt loam soil holds moisture and drains slowly, which is exactly why sand matters for drainage layers under patios and walkways in this area. With a growing season that runs late April to mid October, most hardscape projects here happen in a tight window, so having material on site when the crew is ready matters. Masonry work around the older brick and stone buildings downtown still relies on this finer, uniform sand for workable mortar. Pool base prep and paver joint fill are also common calls we get from Lancaster County properties.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand or is it something different for Lancaster projects?

Yes, this is what's commonly called mason sand, washed and finely screened for mortar mixing and paver joints. It's finer and more uniform than concrete sand, which is what makes it workable for mortar and tight joint fill. If your project is mortar or joint sand, this is the right material.

Answer

How many cubic yards do I need for a patio joint fill in Lancaster?

One cubic yard covers about 324 square feet at a 1 inch depth, which is more than enough for joint fill on most residential patios since joints only need a thin layer worked in. Measure your patio's total square footage, and for joint work alone you'll likely need well under a full yard.

Answer

When is the best time to schedule sand delivery for a hardscape project here?

Spring through fall is peak hardscape season in Lancaster, with most patio and walkway projects happening between late April and mid October before first frost. Ordering a few days ahead of your work weekend gives you flexibility, and keeping the pile covered protects it from spring rain until you're ready to use it.

Answer

Where will the sand be dropped and do I need to prepare anything?

The load is dropped in one pile at a spot you specify, usually a driveway or curb area accessible to a delivery truck. Clear the space ahead of time and lay down a tarp or plywood if you want to protect pavement underneath, since a full yard leaves a mark otherwise.

Answer

Should I use sand or chip stone for my paver joints?

Sand has been the traditional choice for paver joints, but many contractors in this region are shifting to clean chip stone since it doesn't pump out or wash away during heavy rain the way sand can. If you want the traditional look and are comfortable with occasional joint refill, sand still works fine for lighter foot traffic areas.

More delivery around Lancaster, Pennsylvania

All Lancaster, Pennsylvania landscape supply