I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, so a small paver patio or pool base job often needs less than a full yard while a larger mortar mixing job for a full walkway rebuild can run higher. Since install depth typically runs 1 to 2 inches depending on the use, cut the coverage number roughly in half if you are going 2 inches deep. Figure your square footage first, then match it to depth before ordering.
What is a Yard?
What is a Yard?
FAQs
FAQs
Levittown Sand Delivery
Levittown Sand Delivery
Regular price
$74.00
per
Yard
Regular price
Sale price
$74.00
Unit price
per
Shipping calculated at checkout.
Minimum of 3 Yard
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local sand, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your sand isn't the quantity or quality you ordered, we'll make it right.
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, so a small paver patio or pool base job often needs less than a full yard while a larger mortar mixing job for a full walkway rebuild can run higher. Since install depth typically runs 1 to 2 inches depending on the use, cut the coverage number roughly in half if you are going 2 inches deep. Figure your square footage first, then match it to depth before ordering.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Most jobs using mason sand also need pavers or natural stone on top, and increasingly clean chip stone underneath instead of sand bedding since it does not pump or wash out the way sand can. If you are doing mortar work, portland cement and a mixing station on site round out the list. Pool base jobs often pair mason sand with a bit of extra sand for leveling around the liner.
Mulch Mound Pro Tip
For mortar mixing in this climate, keep your sand dry and covered before use, since Levittown's humid summers and fall rain can add moisture that throws off your mortar ratio without you realizing it. Damp sand looks fine but changes how much water your mix actually needs. Cover the pile with a tarp between work sessions, especially if the job spans more than a day or two, and always test a small batch before mixing a full run.
Mulch Mound Pro Tip
A common mistake on paver jobs is using mason sand as the bedding layer under the pavers themselves. It works, but it is being phased out in favor of clean chip stone because sand bedding can migrate and pump up through joints over time, especially with New York's freeze thaw cycles hitting Levittown each winter. Save the mason sand for the joints and mortar work, and use chip stone underneath for a base that holds its shape longer.
Mulch Mound Pro Tip
Order mason sand and any paver base material in the same delivery when possible, since combining loads cuts down on truck trips to your property and gets everything on site before you start. If your project timeline stretches into late fall, plan around the October 21 first frost, since mortar work gets unreliable once temperatures start dropping toward freezing overnight.
Working With Sand in Levittown
Levittown sits on sandy loam already, so drainage is rarely the issue on these lots, but that same soil does nothing for you once you are setting pavers or mixing mortar for a walkway near the Levittown Historical Society and Museum. Original Levittown Cape and ranch homes often have older patios and stoops that need repointing, and mason sand is what makes that mortar workable instead of stiff. With hardscape season running spring through fall here and the ground not freezing solid until deep into fall given the October 21 first frost, there is a wide window to get paver joints or a pool base done right.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.