About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard covers about 324 square feet at a 1 inch depth, and this material is typically installed 1 to 2 inches deep depending on the job. Mortar mixing jobs use less volume overall since it is measured by mix ratio, while paver joint filling and pool bases are closer to full coverage calculations. Figure your square footage first, then decide if you are going thin for joints or fuller for a base layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Livonia Sand Delivery

Livonia Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard covers about 324 square feet at a 1 inch depth, and this material is typically installed 1 to 2 inches deep depending on the job. Mortar mixing jobs use less volume overall since it is measured by mix ratio, while paver joint filling and pool bases are closer to full coverage calculations. Figure your square footage first, then decide if you are going thin for joints or fuller for a base layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Livonia Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most paver jobs around Livonia pair this sand with a compacted gravel base below and edge restraints to keep the joints from migrating. If you are doing brick or block work near an older property like the homes around Greenmead, mortar mixing sand pairs naturally with mason's lime and portland cement on site. Pool base installs often add a layer of gravel underneath for drainage before the sand goes down.

Mulch Mound Pro Tip

Mason sand and concrete sand are not interchangeable even though people use the terms loosely. This material is finer and more uniform, which is exactly what makes mortar workable under a trowel. If you substitute coarser concrete sand in a mortar mix, you will fight a gritty, less plastic mix all day. For brick or block repair work around older Livonia homes, confirm you are getting the finer washed product, not construction grade.

Mulch Mound Pro Tip

A common mistake on paver jobs is over relying on sand joints in a climate with real freeze thaw cycles. Livonia's frost window from mid October to late April means water in joint sand can freeze and heave pavers over a few seasons. Many installers now use chip stone in the joints instead since it locks together and does not pump out under freeze thaw pressure, saving this sand strictly for mortar and pool base work.

Mulch Mound Pro Tip

If you are doing both a paver project and a mortar or pool base project the same season, order them separately rather than trying to stretch one load across uses. The fine washed sand for mortar and pool bases is a different product than what most paver installers use today, and mixing intended uses on one delivery usually means running short on the job that actually needs it.

Working With Sand in Livonia

Livonia sits on loam soil, which drains reasonably well but still holds moisture longer than sandy ground, so masons here lean on this sand to get consistent mortar behavior instead of fighting the native dirt. With a first frost around October 17 and last frost near April 28, the real building window runs about six months, and most mortar and paver joint work bunches up in that stretch. Homeowners near Greenmead Historical Park doing brick walkway repairs or patio joints ask for this by name because it packs finer and more evenly than concrete sand. Pool installers also use it as a smooth base layer before the liner goes down.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, in some regions this exact product is called mason sand, and it is washed and finely screened the same way. We use the standard term here, but if you are used to hearing mason sand from a supplier down south, it is the same material you are getting.

Answer

How many cubic yards do I need for a mortar job?

Mortar mixing uses volume differently than a coverage calculation since it depends on your mix ratio, but as a rough guide, a cubic yard goes a long way for typical brick or block repair work. For paver joints or a pool base measured by area, one cubic yard covers about 324 square feet at a 1 inch depth.

Answer

When is the best time to schedule this for a paver or pool project in Livonia?

Spring through fall is the active building window here, roughly late April through mid October before frost sets back in. Most hardscape and pool installers book their sand deliveries early in that window since demand picks up quickly once the ground dries out from winter.

Answer

Can the delivery truck reach my backyard or work area?

Trucks typically place material at the end of a driveway or another accessible flat spot, not directly in a backyard. If your project area is behind the house, plan on moving material by wheelbarrow from the drop point, and let us know about any access issues like narrow driveways when you schedule.

Answer

Should I use this sand or chip stone for my paver joints?

Chip stone has become the more common choice for paver joints because it locks in place and does not pump out during freeze thaw cycles, which matters given Livonia's cold winters. This sand is still the right call for mortar mixing and pool base work where its fine, uniform texture is exactly what the job needs.

More delivery around Livonia, Michigan

All Livonia, Michigan landscape supply