• Marietta GA Sand Delivery - Mulch Mound
  • Marietta GA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most paver joint work or mortar prep only calls for 1 to 2 inches total. For a typical patio or walkway job in Marietta, figure your square footage first, then decide if you are filling joints thin or bedding a small area deeper, since the yardage changes fast between those two uses.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Marietta Sand Delivery

Marietta Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most paver joint work or mortar prep only calls for 1 to 2 inches total. For a typical patio or walkway job in Marietta, figure your square footage first, then decide if you are filling joints thin or bedding a small area deeper, since the yardage changes fast between those two uses.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Marietta Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Most jobs using this sand also need paver base stone underneath and edge restraint to keep everything locked in place, especially on Marietta's clay subgrade where movement is common. If you are pouring a pool deck or setting a cove, a delivery of crushed stone alongside the sand covers both the structural and finish layers in one trip.

Marietta Soil Delivery
Marietta Mulch Delivery
Map of the sand delivery area around Marietta, Georgia

Service area

Areas we deliver sand in Marietta, Georgia

See All Locations
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly what makes a mortar mix workable under trowel. If you are batching mortar in Marietta's humidity during summer, keep the pile covered so it does not pick up extra moisture, since wet sand throws off your water to mix ratio and makes the mortar too soupy to set joints cleanly.

Mulch Mound Pro Tip

A common mistake is using mason sand as full paver bedding instead of joint fill. Many crews have shifted to clean chip stone for bedding because it locks together and does not pump up through the joints after rain, something sand alone tends to do once Marietta's clay subgrade gets saturated. Save the mason sand for the top joint work, not the base.

Mulch Mound Pro Tip

If a job needs both bedding stone and joint sand, order them together so delivery lands the same day and you are not paying for two separate trips. Buying the sand loose by the cubic yard instead of in bags also cuts down on the plastic waste and the trips to load bags into a truck, which adds up fast on any patio bigger than a small entryway.

Working With Sand in Marietta

Marietta sits on heavy clay, and clay does not drain the way a paver base or mortar mix needs to behave. When crews here are laying a patio around the Square or setting steppers in a backyard, this sand fills the joints and levels the bedding without the clumping and staining that clay contamination causes. It handles a wet spring the way clay soil never will, and with hardscape season running spring through fall, having clean sand on hand keeps a mortar mix workable instead of stiff. It is also the standard fill for pool cove bases, which matters in a city with plenty of in ground pool installs.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as regular sandbox or play sand?

No, this is mason sand, washed and screened specifically for mortar mixing and paver joint work. It is finer and more consistent than construction grade sand and is not intended for play areas or drainage fill, where a coarser sand or gravel product works better.

Answer

How many cubic yards do I need for a small patio's paver joints?

At a 1 inch fill depth, one cubic yard covers about 324 square feet, but joint fill only uses a fraction of that area since you are filling gaps, not the whole surface. Most patios under 500 square feet need well under a full cubic yard for joints alone.

Answer

Can I install this in the fall before the first frost hits?

Yes, mason sand work is not temperature sensitive the way concrete curing is, but mortar mixing gets harder to manage once temperatures drop close to freezing. With Marietta's first frost around November 5, plan mortar heavy projects to wrap up by late October for easier working conditions.

Answer

Will the delivery truck be able to reach my backyard?

Delivery trucks place material at the closest safe access point, typically a driveway, and cannot drive across lawns or through narrow side gates. If your project area is in the backyard, plan on moving the sand by wheelbarrow from the drop point, and let us know ahead of time if access is tight.

Answer

Should I use this or chip stone for my paver base?

For paver bedding, many Marietta installers now prefer clean chip stone since it interlocks and resists pumping up through joints after heavy rain, a problem sand can have on clay subgrade. Mason sand is still the better choice for the actual joint fill on top, so the two often get used together, not interchangeably.

More delivery around Marietta, Georgia

All Marietta, Georgia landscape supply