About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard covers about 324 square feet, and most paver or mortar work only needs that 1 to 2 inch range, so a single yard often handles a modest patio or walkway base. For a two car paver driveway or a larger pool base, plan on multiple yards and measure the actual square footage first rather than guessing. Since it is sold by the cubic yard, round up slightly rather than short yourself mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Mercer Sand Delivery

Mercer Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard covers about 324 square feet, and most paver or mortar work only needs that 1 to 2 inch range, so a single yard often handles a modest patio or walkway base. For a two car paver driveway or a larger pool base, plan on multiple yards and measure the actual square footage first rather than guessing. Since it is sold by the cubic yard, round up slightly rather than short yourself mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Mercer Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most paver jobs pair this sand with a compacted base layer of crushed stone underneath and polymeric sand or chip stone for the joints on top. Pool installers often order it alongside a gravel base layer for drainage under the liner. If you are mixing mortar for a courthouse era brick repair, you will just need the sand and your cement, nothing else.

Mulch Mound Pro Tip

For mortar mixing in Mercer's cooler shoulder seasons, keep your sand dry and covered before use, since silt loam ground holds ambient moisture and a tarp left loose will let dampness creep into the pile overnight. Damp sand throws off your mortar ratio more than people expect, especially on smaller batch mixes where a quarter cup of extra water matters.

Mulch Mound Pro Tip

A common mistake with paver bedding sand is screeding it too deep, past the 1 to 2 inch range, which leaves pavers wobbling under foot traffic. Many installers now use clean chip stone under pavers instead of sand precisely because sand can pump and shift over freeze thaw cycles, something Mercer sees plenty of with frost arriving by October.

Mulch Mound Pro Tip

If your project needs both bedding material and mortar sand, order them as separate deliveries rather than trying to make one grade do both jobs. Mason sand's fine, uniform grain is what makes mortar workable, but that same fineness means it compacts differently than coarser bedding material, so mixing purposes with one pile usually shortchanges one of the two tasks.

Working With Sand in Mercer

Mercer sits on silt loam, which already holds moisture well, so most of the sand work we see here is not soil amendment, it is hardscape. Folks building patios near the courthouse square or setting pavers on a home lot are using it for bedding and joint fill more than anything else. With a 6a growing zone and frost coming back by mid October, the real work window here runs spring through fall, and jobs that stall into late fall need to get sand down before the ground starts working against you. It is also the sand of choice for mortar mixing on brick and block projects, since the finer, uniform grain makes the mix workable.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is this sand actually used for around Mercer?

It is a washed, finely screened sand best suited to mortar mixing, paver joint fill, and pool bases. Locally it shows up most on patio and walkway projects near town and on pool installs where a fine, uniform grain is needed. It is not the material for drainage or fill work, that calls for a coarser product.

Answer

How many cubic yards do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which is the typical bedding depth for most paver work. Measure your patio's square footage, divide by 324, and round up. A 300 square foot patio at 1 inch would need roughly one yard, while deeper 2 inch applications need close to double that.

Answer

When is the best time to install this in Mercer?

Spring through fall is the practical window here, since hardscape work slows once frost sets in around October 10 and the ground stays workable again after the mid May last frost. Sand itself does not have a planting season, but paver and mortar work goes smoother when the ground isn't frozen or saturated.

Answer

Where will the sand be placed when it's delivered?

The driver places the load wherever you indicate at checkout, typically a driveway, curbside spot, or staging area near your project. Make sure that area is clear and accessible, since a full load of sand is heavy and is not repositioned after drop off. Delivery timing itself is scheduled at checkout, not guaranteed in advance.

Answer

Should I use sand or chip stone under my pavers?

Traditional mason sand bedding still works, but many installers are shifting to clean chip stone since it does not pump or shift the way sand can under freeze thaw cycles, which matters given Mercer's frost season. If your project is mortar mixing rather than paver bedding, sand remains the right choice since chip stone will not substitute there.”

More delivery around Mercer, Pennsylvania

All Mercer, Pennsylvania landscape supply