About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

Mason sand covers about 324 square feet at a 1 inch depth per cubic yard, and most paver joint or leveling work only needs 1 to 2 inches, so a single yard often handles a good sized patio or walkway joint fill. For mortar mixing, sizing depends on batch volume rather than area, so estimate by the number of mixed batches your mason plans to run. At 1.35 tons per yard, even a modest order adds up in weight, so plan your access point with that in mind.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Mooresville Sand Delivery

Mooresville Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

Mason sand covers about 324 square feet at a 1 inch depth per cubic yard, and most paver joint or leveling work only needs 1 to 2 inches, so a single yard often handles a good sized patio or walkway joint fill. For mortar mixing, sizing depends on batch volume rather than area, so estimate by the number of mixed batches your mason plans to run. At 1.35 tons per yard, even a modest order adds up in weight, so plan your access point with that in mind.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Mooresville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand is usually paired with paver base stone, polymeric jointing sand, or the actual pavers themselves depending on where you are in the build. For mortar work, it pairs with masonry cement and sometimes a wall stone or brick order delivered the same trip. If you are still deciding between sand and chip stone for paver bedding, it is worth talking through with whoever is running the install.

Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works in mortar but is a poor sub for structural fill. If your project involves both mortar mixing and paver base work, order two separate materials rather than trying to stretch one bag of mason sand across both jobs, since using it as base fill under pavers on Mooresville's clay soil invites drainage problems down the road.

Mulch Mound Pro Tip

A common mistake is ordering mason sand for paver bedding out of habit when chip stone would hold up better long term. Sand under pavers can shift and pump moisture up through the joints over time, especially with our clay soil trapping water underneath. If your project is a paver patio or walkway rather than mortar work, ask about chip stone before you order.

Mulch Mound Pro Tip

Buying mason sand and your other masonry materials in the same delivery saves a trip and keeps your crew from waiting on a second truck mid job. If you know your project needs both sand and stone or brick, place them together and have the crew stage the sand pile closest to the mixing station to save labor time on site.

Working With Sand in Mooresville

Mooresville sits on red clay, and clay does not drain the way sand does, so when a project calls for a stable, well drained layer under pavers or around a pool shell, mason sand gives you something the native soil cannot. With Lake Norman nearby and a lot of waterfront and dock construction in this area, sand comes up constantly for pool decks, retaining wall backfill, and mortar for stone veneer on lakeside homes. Zone 8a winters are mild enough that hardscape work can continue later into the fall than colder regions allow. Just know that on clay based lots, drainage planning around the sand layer matters more than it would on sandier soil.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand from a hardware store bag?

Not quite. Bagged sand varies a lot in grain size and cleanliness. Our mason sand is washed and finely screened for consistency, which is what makes it workable in mortar mixes and reliable for pool base and paver joint applications. It is more uniform than what you typically get in small bags.

Answer

How much mason sand do I need for a paver patio joint fill?

One cubic yard covers about 324 square feet at a 1 inch depth. Since joint fill only needs a thin layer worked into the gaps rather than a full 1 to 2 inch bed, many patios only need a fraction of a yard, but we sell by the full or partial cubic yard so measure your square footage first.

Answer

When is the best time to do paver or mortar work in Mooresville?

Spring through fall is peak hardscape season here, and our zone 8a winters are mild enough that work can often continue into late fall. Just avoid mixing mortar in freezing temperatures, which is rare here but does happen around the first frost in early November.

Answer

Where will the sand be dropped and do I need to be home?

You choose your delivery date at checkout, and the driver places the pile at an accessible spot near your driveway or work area. You do not need to be present, but it helps to have a clear, hard surface ready since sand is heavy and can sink into soft or grassy ground.

Answer

Should I use mason sand or chip stone under my pavers?

Chip stone has become the more common choice for paver bedding because it does not pump or wash out the way sand can, especially over Mooresville's clay subsoil. Mason sand still makes sense for mortar mixing, pool bases, and joint filling. If your project is primarily paver installation, ask about chip stone before ordering sand for the base.

More delivery around Mooresville, North Carolina

All Mooresville, North Carolina landscape supply