• Murfreesboro TN Sand Delivery - Mulch Mound
  • Murfreesboro TN Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Mitch Smouse
Mitch Smouse
Google Review

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, which is the typical install range for paver joints and bedding work. For a small patio or walkway project, most Murfreesboro homeowners order somewhere between half a yard and two yards depending on square footage and depth. Measure your area first, then decide if you need a thin joint fill layer or a full bedding depth before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Murfreesboro Sand Delivery

Murfreesboro Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Mitch Smouse
Mitch Smouse
Google Review

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, which is the typical install range for paver joints and bedding work. For a small patio or walkway project, most Murfreesboro homeowners order somewhere between half a yard and two yards depending on square footage and depth. Measure your area first, then decide if you need a thin joint fill layer or a full bedding depth before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Murfreesboro Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review
Julie Nekich
Julie Nekich

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...

Read full review

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, natural stone, or brick for anyone doing a patio, walkway, or pool deck around Murfreesboro. Some jobs also call for crushed limestone base material underneath before the sand layer goes down, especially on this area's clay heavy ground. If you're mixing mortar on site, having extra sand on hand keeps a masonry crew from stopping mid pour to reorder.

Murfreesboro Soil Delivery
Murfreesboro Mulch Delivery
Map of the sand delivery area around Murfreesboro, Tennessee

Service area

Areas we deliver sand in Murfreesboro, Tennessee

See All Locations
Mulch Mound Pro Tip

Mason sand only works well for mortar if it stays dry until you're ready to mix, so tarp the pile if rain is in the forecast, especially during Murfreesboro's wetter spring stretch. Wet sand throws off your water to sand ratio and makes mortar either too soupy or too stiff to spread evenly, which shows up later as weak joints between brick or block.

Mulch Mound Pro Tip

A common mistake on paver jobs here is skimping on compaction before adding the sand layer, especially over Murfreesboro's clay subsoil, which shifts more than sandy soil once it gets saturated. Compact your base layer first, screed the sand level, then set your pavers, don't just pour sand over uneven clay and expect it to stay flat through a wet winter.

Mulch Mound Pro Tip

If you're doing both a paver patio and a mortar based retaining wall, order mason sand for the mortar work and consider chip stone instead of sand for the paver bedding layer, since chip stone locks together and doesn't wash out or pump up through joints the way sand can over time. This can save you from redoing bedding work a few years down the line.

Working With Sand in Murfreesboro

Murfreesboro sits on clay and limestone ground that drains slowly and gets sticky when wet, which is exactly why a clean, uniform sand layer matters for anything you're setting on top of it, whether that's pavers, a paver patio base, or a pool. Mason sand gives you a consistent bedding surface that doesn't hold water the way the native clay does. Around Stones River and the older parts of town where a lot of hardscape and masonry work goes on, contractors lean on this sand for mortar because it mixes workable and doesn't fight the trowel. Zone 7a's freeze thaw cycles each winter can shift base material that isn't compacted right, so starting with the correct sand matters more here than in milder climates.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as what people call mason sand around here?

Yes, mason sand and this washed, finely screened sand are the same product, and it's the term a lot of Murfreesboro contractors use. It's finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and tight paver joints.

Answer

How much sand do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which is typical for a joint fill or leveling layer. If your patio needs a full 2 inch bedding depth, plan on roughly half that coverage per yard, so measure your square footage first and adjust from there.

Answer

When is the best time to do sand and paver work in Murfreesboro?

Spring through fall is prime hardscape season here, once the ground has thawed after the last frost around April 10 and before things get too wet or too cold heading into late October. Working in this window means the sand and any mortar you mix will cure and set properly instead of fighting cold or soggy conditions.

Answer

Can the delivery truck get into a tighter driveway or backyard?

Delivery is scheduled at checkout, and the sand is dropped in one load at a spot the truck can access, usually a driveway or curbside area. If your access is tight or you need it placed in a specific spot in the yard, it helps to clear the path beforehand so the driver can place it exactly where you need it.

Answer

Should I use sand or chip stone under my pavers?

Sand has been the traditional choice for paver bedding, but a lot of installers are shifting to clean chip stone because it locks together and resists pumping or washing out over time. Sand still works well and is often less prone to shifting on smaller jobs, but for driveways or heavier traffic areas, chip stone tends to hold up better long term.

More delivery around Murfreesboro, Tennessee

All Murfreesboro, Tennessee landscape supply