About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs run 6 to 12 inches depending on how much you need to raise the grade. Measure the low area in square feet, decide your target depth, and order in cubic yards accounting for compaction, since fill settles as much as 10 to 15 percent once it is packed down. For foundation or pool backfill, it is worth rounding up rather than running short mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Nashville Fill Dirt Delivery

Nashville Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs run 6 to 12 inches depending on how much you need to raise the grade. Measure the low area in square feet, decide your target depth, and order in cubic yards accounting for compaction, since fill settles as much as 10 to 15 percent once it is packed down. For foundation or pool backfill, it is worth rounding up rather than running short mid project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Nashville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a few inches of topsoil on top since fill dirt is not meant to grow anything directly. If you are building up a bed or lawn area, pair the fill with screened topsoil for the final layer, and consider a compactable base material first if the area will bear any real weight like a patio or shed pad.

Mulch Mound Pro Tip

Nashville's clay subsoil holds water, so if you are filling low ground near a foundation, slope the finished grade away from the house at least 2 inches over the first 10 feet. Skipping this step just moves the drainage problem instead of solving it. Compact each 6 to 8 inch lift with a plate compactor before adding the next, especially near structures where settling later means cracked concrete or a sinking patio.

Mulch Mound Pro Tip

The most common mistake we see is treating fill dirt like topsoil and trying to plant directly into it. It has no organic matter and compacts hard, so grass seed and root systems struggle. Always cap finished fill with 3 to 4 inches of real topsoil before seeding or sodding, and give the fill a few weeks to settle after compaction if the schedule allows it.

Mulch Mound Pro Tip

If you are filling a large low spot, order fill dirt for the bulk of the volume and save topsoil for just the top layer, since topsoil costs more and does nothing structurally underground. This layered approach, fill below and topsoil above, is standard practice for foundation backfill and grade raises around Nashville's older housing stock where original lots were never graded well to begin with.

Grading and Filling in Nashville

Nashville sits on clay and limestone that does not drain well once you get past the first few inches, so low areas around foundations, pools, and low corners of a lot tend to stay wet long after a storm. Fill dirt is the structural fix, it builds the grade back up so water sheds away from the house instead of pooling against it. This is common work around older homes near the Parthenon and East Nashville where original grading has settled over decades. It is not a growing medium, so plan to cap it with topsoil wherever grass or beds go on top.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same thing as topsoil?

No, fill dirt is subsoil screened of debris and rock, used as a structural base to raise grade or backfill. Topsoil is the nutrient rich layer on top where things actually grow. Use fill dirt for the bulk of the depth and cap it with topsoil if you need grass, plants, or a garden bed on top.

Answer

How many cubic yards of fill dirt do I need for my yard?

One cubic yard covers about 54 square feet at a 6 inch depth. Measure your low area's square footage, multiply by your target depth in feet, and order a bit extra since fill settles 10 to 15 percent as it compacts. For a typical foundation backfill or low spot, most Nashville homeowners order between 5 and 15 cubic yards.

Answer

When is the best time to bring in fill dirt in Nashville?

Fill dirt is project driven, not seasonal, so timing depends on your job rather than the calendar. That said, working outside the wettest stretches, typically late winter into early spring, makes compaction easier since Nashville's clay soil gets heavy and hard to work when saturated. Drier fall weeks before the October frost also work well.

Answer

Can your truck access a backyard or does it have to go in the driveway?

Our trucks place material where your driveway or yard access allows, so if you have gates, slopes, or a fence blocking backyard access, let us know before delivery. In tighter Nashville lots near downtown and East Nashville, we often place near the street or driveway and the customer moves it in with a wheelbarrow.

Answer

Should I use fill dirt or a compactable base for a shed or patio pad?

Fill dirt works for building up general grade, but if the area will carry real weight like a shed, patio, or shed pad, a compactable base material like crushed limestone gives better long term stability. Fill dirt is best for grading and backfill, not for load bearing surfaces, unless it is compacted thoroughly in lifts and capped with proper base material.

More delivery around Nashville, Tennessee

All Nashville, Tennessee landscape supply