So Easy!
So Cheap!
So doing this again next year!

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.
The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a ni...
Read full review
The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.
Complete Your Outdoor Project
Mason sand pairs naturally with pavers, natural stone, and brick when you are mixing mortar or setting a bedding layer, and a lot of Newark jobs also call for crushed gravel underneath for drainage before the sand goes down. If you are doing a pool install, a base layer of stone dust or sand often gets topped with this finer sand for the smooth final surface. Keep in mind chip stone is increasingly used instead of sand for paver bedding since it will not pump out over time.
Service area
Areas we deliver sand in Newark, Ohio
Mason sand is finer and more uniform than concrete sand, which is exactly why it works so well for mortar, but that same fineness means it holds water differently. In Newark's silt loam yards, keep your sand pile covered or tarped if rain is expected before you mix, since a soaked pile changes your water to cement ratio and can throw off a whole batch of mortar without you noticing until it sets wrong.
A common mistake with mason sand under pavers is skipping compaction before laying stones, especially with our silt loam base soil which shifts more than sandy soil during freeze thaw cycles. Compact your sand bed in thin lifts, not all at once, and try to finish paver work well before the October 15 first frost so everything has time to settle before winter movement starts.
If you are doing a pool base or a small paver patio, consider whether chip stone might serve you better for bedding since it resists pumping and shifting over time better than sand does. Save mason sand specifically for mortar mixing and pool liner bases where its fine, uniform texture actually matters, and you will get more value out of each yard you order.
Working With Sand in Newark
Newark sits on silt loam, which already holds moisture and compacts tight, so a lot of local masons lean on mason sand to get workable mortar for stone and brick jobs tied to the area's historic buildings near the Great Circle Earthworks. Pool installers around here also use it as a leveling base under liners since it settles evenly and does not leave voids. Zone 6a winters mean freeze thaw cycles are real, so sand used under pavers or patios needs to be laid and compacted correctly before that first frost around October 15 locks everything in place. Get hardscape work done while the ground is still workable in the warmer months.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.