• North New Hyde Park NY Sand Delivery - Mulch Mound
  • North New Hyde Park NY Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Sima Susac-Heller
Sima Susac-Heller
Google Review

Online ordering was really simple and I liked the transparent pricing.

One cubic yard covers about 324 square feet at a 1 inch depth, and typical install depth for this sand runs 1 to 2 inches depending on whether you are bedding, jointing, or mixing mortar. For paver joints on a standard patio, you will usually need far less than a full yard, so measure your square footage first and figure your depth before ordering. Mortar mixing projects are sized differently, by ratio to cement, so talk through your batch plan before placing a large order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

North New Hyde Park Sand Delivery

North New Hyde Park Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Sima Susac-Heller
Sima Susac-Heller
Google Review

Online ordering was really simple and I liked the transparent pricing.

One cubic yard covers about 324 square feet at a 1 inch depth, and typical install depth for this sand runs 1 to 2 inches depending on whether you are bedding, jointing, or mixing mortar. For paver joints on a standard patio, you will usually need far less than a full yard, so measure your square footage first and figure your depth before ordering. Mortar mixing projects are sized differently, by ratio to cement, so talk through your batch plan before placing a large order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of North New Hyde Park Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Rob H
Rob H

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

Google Review
scott fisher
scott fisher

I contacted Mulch Mound for #57 river rocks and it was easy and fast to get a delivery right before the holiday weekend. Stone was delivered as pro...

Read full review

I contacted Mulch Mound for #57 river rocks and it was easy and fast to get a delivery right before the holiday weekend. Stone was delivered as promised and place exactly where I asked. Excellent service! I will be ordering mulch next!

Google Review

Complete Your Outdoor Project

Most paver jobs here pair this sand with a compacted base layer of crushed stone or gravel underneath, and increasingly with chip stone for bedding instead of sand, since chip stone resists the pumping and washout that sand bedding can suffer over a Long Island winter. If you are mixing mortar for a walkway or steps, you will also want cement on hand before the load arrives.

North New Hyde Park Soil Delivery
North New Hyde Park Mulch Delivery
Map of the sand delivery area around North New Hyde Park, New York

Service area

Areas we deliver sand in North New Hyde Park, New York

See All Locations
Mulch Mound Pro Tip

For paver joints, sweep the sand in dry, then run a plate compactor or hand tamper over the surface before wetting it down, this settles the sand into the joint instead of just sitting on top. In this area's freeze thaw cycle, joints that are not compacted before the first winter tend to develop gaps by spring, which means resweeping the following season instead of a one time job.

Mulch Mound Pro Tip

A common mistake on Long Island jobs is using this sand as a full paver bedding layer under heavy traffic areas like a driveway apron. It shifts and pumps over time, especially with freeze thaw cycling, which is why more installers here are switching to chip stone for bedding and reserving this sand strictly for the joints and mortar mixing it is actually suited for.

Mulch Mound Pro Tip

If your project involves both mortar mixing and joint filling, order them as separate quantities rather than one combined estimate, since mortar sand ratios depend on your cement mix design while joint sand is a straight volume calculation. This keeps you from running short on one and oversupplied on the other, which matters more on a smaller residential job than it would on a big commercial pour.

Working With Sand in North New Hyde Park

North New Hyde Park sits on sandy loam already, so this material is not fixing a soil problem, it is a construction input for hardscape work. With a growing season that runs from mid April to mid November, most patio and walkway projects here get built in that window before the ground firms up for winter. Fine sand like this is what makes joint filling between pavers actually pack and lock, rather than washing out after the first hard rain. If you are doing mortar work for a walkway or steps, this is the grade that gives a workable, sandable mix.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this washed and finely screened sand is what is commonly called mason sand in some regions, and it is the same product used here for mortar mixing, paver joints, and pool bases. It is finer and more uniform than concrete sand, which is what gives mortar its workability and lets it pack tightly into paver joints.

Answer

How much sand do I need for a paver patio's joints?

One cubic yard covers about 324 square feet at a 1 inch depth, but joint filling uses far less volume than that since you are only filling narrow gaps, not covering the whole surface. Measure your patio square footage and joint width, most standard residential patios need well under a full cubic yard for joints alone.

Answer

When is the best time to install paver joint sand in North New Hyde Park?

Spring through fall is the practical window here, roughly mid April through mid November between last and first frost, since the sand needs to be worked and compacted in dry, workable conditions. Trying to install joint sand right before a hard freeze in late November risks it not settling properly before winter movement sets in.

Answer

Where will the sand be dropped and do I need to be home?

The driver places the load wherever you direct at delivery, typically a driveway or curb space near your work area, and delivery is scheduled at checkout rather than a fixed same day promise. You do not need to be present, but someone should confirm access and a clear drop spot ahead of time, especially on narrower streets.

Answer

Should I use sand or chip stone for paver bedding?

For paver bedding specifically, chip stone is increasingly preferred over sand because it resists pumping and washout over time, particularly through freeze thaw winters like this area sees. This sand is still the right choice for joint filling and mortar mixing, it is just being phased out as a bedding material on new installs.

More delivery around North New Hyde Park, New York

All North New Hyde Park, New York landscape supply