About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and joint work only calls for 1 to 2 inches, so a single yard goes a long way on a typical patio or paver job. Figure your square footage first, then decide if you need the full 2 inches for a pool base versus a thin 1 inch layer for joint sweeping. Most residential jobs in Ocala order somewhere between a half yard and two yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Ocala Sand Delivery

Ocala Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and joint work only calls for 1 to 2 inches, so a single yard goes a long way on a typical patio or paver job. Figure your square footage first, then decide if you need the full 2 inches for a pool base versus a thin 1 inch layer for joint sweeping. Most residential jobs in Ocala order somewhere between a half yard and two yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Ocala Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Pair mason sand with paver base stone or crushed concrete for the compacted sub base, then use the sand for the leveling course and joint fill on top. If you are mixing mortar for a block wall or barn foundation, you will also want cement and a mixing surface on site. Many Ocala jobs order both the base material and the sand together to keep the delivery to one trip.

Map of the sand delivery area around Ocala, Florida

Service area

Areas we deliver sand in Ocala, Florida

Mulch Mound Pro Tip

Mason sand is being replaced by clean chip stone for paver bedding in a lot of markets because chip stone does not pump moisture up through the joints the way sand can. If you are setting pavers in Ocala where afternoon storms are frequent through summer, ask yourself whether you want sand under the pavers or just in the joints. Many masons here still use sand for joint fill but switch to stone underneath.

Mulch Mound Pro Tip

Keep mason sand covered or tarped once delivered, especially during Ocala's wet season from June through September. Wet sand still works for mortar but it throws off your water to mix ratio, and a soaked pile is harder to shovel and screed evenly. A simple poly tarp weighted at the corners keeps it workable for weeks.

Mulch Mound Pro Tip

If your project needs both mortar sand and a paver base layer, order them on the same delivery instead of two separate trips. Ocala's hardscape season runs spring through fall, so contractors and DIYers who bundle materials tend to keep projects moving instead of waiting on a second load mid build.

Working With Sand in Ocala

Ocala already sits on sandy native soil, so this is not about amending ground, it is about construction grade work. With horse country building out barns, arenas, and pool decks year round, mason sand shows up constantly in mortar mixes and paver joint fill. The fine, uniform grain is what makes mortar workable when masons are laying block for a barn foundation or a courtyard wall. It is not meant for turf or bedding, it is a building material first.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical job here?

Mason sand is used for mixing mortar, filling paver joints, and building pool bases. It is finer and more uniform than concrete sand, which is what makes mortar spread and bond properly. In Ocala it shows up most often on block wall construction, paver patios, and pool deck projects.

Answer

How many cubic yards do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth. Most joint fill and bedding work only needs 1 to 2 inches, so a 300 square foot patio typically needs somewhere around 1 to 2 cubic yards depending on how deep you go.

Answer

Does Ocala's rainy season affect when I should install mason sand?

Yes, heavy summer rain from June through September can wash out unset joint sand before it locks in, so many builders here schedule paver and mortar work for spring or fall when conditions are drier and more predictable. If you do work through summer, plan to finish joint sweeping and sealing quickly.

Answer

Where will the sand be placed when it is delivered?

Delivery is scheduled at checkout and the load is placed in your driveway or another spot you specify when you order. Make sure the area is clear and accessible for a delivery truck, and let us know if there are gate or overhead clearance issues ahead of time.

Answer

Should I use mason sand or chip stone under my pavers?

Mason sand has traditionally been used for paver bedding and joint fill, but chip stone is increasingly used underneath pavers because it does not pump or wash out the way sand can. Many Ocala builders now use stone for the base layer and reserve mason sand specifically for joint fill and mortar mixing.

More delivery around Ocala, Florida

All Ocala, Florida landscape supply