About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

I contacted Mulch Mound for #57 river rocks and it was easy and fast to get a delivery right before the holiday weekend. Stone was delivered as promised and place exactly where I asked. Excellent service! I will be ordering mulch next!

Fill dirt is sold by the cubic yard, and one yard covers about 54 square feet at a 6 inch depth, less if you are going deeper. Most structural jobs run 6 to 12 inches, so a 200 square foot low spot at 8 inches deep runs somewhere around 5 cubic yards. Measure the area you are raising and the target depth before ordering, since underestimating means a second delivery mid job.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Philadelphia Fill Dirt Delivery

Philadelphia Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

I contacted Mulch Mound for #57 river rocks and it was easy and fast to get a delivery right before the holiday weekend. Stone was delivered as promised and place exactly where I asked. Excellent service! I will be ordering mulch next!

Fill dirt is sold by the cubic yard, and one yard covers about 54 square feet at a 6 inch depth, less if you are going deeper. Most structural jobs run 6 to 12 inches, so a 200 square foot low spot at 8 inches deep runs somewhere around 5 cubic yards. Measure the area you are raising and the target depth before ordering, since underestimating means a second delivery mid job.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Philadelphia Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs get capped with a few inches of topsoil once the grade is set, especially if lawn or beds are going in on top. If you are backfilling around a foundation or old pool, a layer of compactable gravel underneath the fill can help with drainage before you build up. Mulch or stone finishes the surface once the structural work is done.

Mulch Mound Pro Tip

Fill dirt is a structural material, not something you plant into. Spread it in lifts of 6 to 8 inches and compact each layer with a plate compactor or hand tamper before adding the next. Skipping this step is the number one reason Philadelphia yards develop sunken patches two or three years later, especially over old basement excavations or backfilled pool holes where the ground has more room to settle.

Mulch Mound Pro Tip

Never leave fill dirt bare through a Philly winter if you can help it. Uncapped fill absorbs water, and with first frost landing around October 25th, saturated dirt that freezes and thaws repeatedly will heave and shift. Cap it with topsoil or at minimum a layer of mulch before the ground freezes, even if you are not finishing the grading until spring.

Mulch Mound Pro Tip

If you are filling a large low area, mix fill dirt for the base lifts with a thinner topsoil cap on top rather than using topsoil the whole way down. Topsoil is more expensive and its organic content actually breaks down over time under load, causing more settling than clean subsoil. Save the topsoil for the top 3 to 4 inches where roots actually live.

Grading and Filling in Philadelphia

Philadelphia sits on silt loam that holds water and compacts unevenly once foundations, additions, and old rowhome basements have disturbed it over the decades. Fill dirt gives you a stable base to correct that grading before you cap it with topsoil, which matters more here than in places with sandier ground. With frost showing up by late October and the ground workable again around mid April, most fill projects happen in that window when the soil is diggable but not saturated. It is common here to see pool decommissions, foundation backfill, and low backyard corners near older Philly rowhomes all needing the same fix.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my backyard in Philadelphia without adding topsoil?

You can use it for the structural base, but if grass or plants are going in, cap the fill with 3 to 4 inches of topsoil. Fill dirt alone is subsoil with debris screened out, it lacks the organic content roots need, and Philadelphia's silt loam base already drains slowly enough that a proper topsoil cap makes a real difference.

Answer

How many cubic yards of fill dirt do I need for a low spot in my yard?

One cubic yard covers about 54 square feet at 6 inches deep. Measure your low area in square feet, decide your depth, typically 6 to 12 inches for structural fill, and divide the volume by 27 to get cubic yards. Round up slightly since compaction settles the material after it is placed.

Answer

When is the best time to bring in fill dirt in Philadelphia?

Anytime the ground isn't frozen or saturated works, since fill dirt projects are driven by the job, not the season. That said, working between last frost around April 10th and first frost around October 25th gives you the easiest digging and compacting conditions, and lets any capped topsoil establish before winter.

Answer

Will the delivery truck be able to access my rowhome property?

Most Philadelphia rowhomes have limited driveway or curb access, so the load gets placed as close to your work area as the truck can safely reach, usually the driveway apron or curbside. Clear a space roughly 10 feet wide ahead of your scheduled delivery date, which you'll set at checkout.

Answer

Should I order fill dirt or topsoil for backfilling around my foundation?

Fill dirt is the right choice for foundation and pool backfill since it is a structural material meant to be compacted in lifts, while topsoil is meant for growing and will settle unevenly under load. Use fill dirt for the bulk of the backfill and reserve topsoil only for the surface layer if grass or plantings go on top.=null}]

More delivery around Philadelphia, Pennsylvania

All Philadelphia, Pennsylvania landscape supply