Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
Thanks! We received your request.
Something went wrong. Please try again.
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches. Figure your square footage first, then decide if you are at the thin end for joint filling or the thicker end for a pool base cushion. A cubic yard weighs around 1.35 tons, so plan your unloading area accordingly.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your sand isn't the quantity or quality you ordered, we'll make it right.
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches. Figure your square footage first, then decide if you are at the thin end for joint filling or the thicker end for a pool base cushion. A cubic yard weighs around 1.35 tons, so plan your unloading area accordingly.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all co...
Really appreciate the care and follow thru that this company had with our order. A hiccup came up but they were quick to respond and address all concerns, which made our garden day a success! Thank you for your prompt care.
I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!
Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!
Mason sand pairs with paver base or crushed rock for a stable sub base before the sand layer goes down, and with cement for mortar mixing on block or stone work. Some crews are shifting to clean chip stone under pavers instead of sand since it will not pump out over time. Have both on hand if your design calls for a mixed approach.
Service area
Mason sand dries out fast in Phoenix heat, especially if it sits uncovered for more than a day or two before you mix mortar with it. Keep the pile lightly tarped or dampen it before use so your mortar batches stay consistent. Sand that has baked in direct sun all afternoon will throw off your water ratio and make the mix set unevenly, which shows up as weak joints later.
A common mistake here is using mason sand as paver bedding the same way it was used decades ago. It shifts and can pump up through joints over time, especially with our monsoon downpours saturating the base quickly. Clean chip stone has largely replaced it for bedding work because it locks in place and drains through instead of washing out.
If your job needs both mortar mixing and paver joint sand, order mason sand for both rather than mixing suppliers, since the grain consistency matters more for mortar than people expect. Buying one load covers two tasks and avoids having two half used piles sitting around your job site through the week.
Phoenix sits on caliche and sandy soil that already sheds water fast, so mason sand here is almost always doing structural work, not soil amendment. Mortar mixes need consistent grain size to stay workable in our dry heat before it sets up too quickly. Pool base and paver joint work both benefit from sand that will not shift once the caliche underneath settles. With hardscape season running spring through fall here, most orders are tied to an active build, not a weekend fix.
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.
