About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical paver patio or walkway project usually needs somewhere between a half yard and two yards depending on footprint and whether you are also mixing mortar. Install depth for most uses runs 1 to 2 inches, so measure your area first and decide if you are bedding pavers or just filling joints, since joint work uses far less material than a full bedding layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Pittsfield Sand Delivery

Pittsfield Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard covers about 324 square feet at a 1 inch depth, so a typical paver patio or walkway project usually needs somewhere between a half yard and two yards depending on footprint and whether you are also mixing mortar. Install depth for most uses runs 1 to 2 inches, so measure your area first and decide if you are bedding pavers or just filling joints, since joint work uses far less material than a full bedding layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Pittsfield Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most sand orders in Pittsfield pair with either paver stone or a chip stone base layer, since chip stone has been replacing sand under pavers because it will not pump or wash out over time. If you are mixing mortar, you will also want cement on hand before the load arrives. Pool base projects usually call for a compactable gravel layer underneath the sand as well.

Map of the sand delivery area around Pittsfield, Massachusetts

Service area

Areas we deliver sand in Pittsfield, Massachusetts

Mulch Mound Pro Tip

If you are bedding pavers, know that many crews in colder New England climates are shifting away from sand toward compactable chip stone, since sand can pump up through paver joints during freeze thaw cycles and leave your surface uneven by the second winter. Sand still works well for mortar and joint filling, but for the structural bedding layer under a walkway, ask about chip stone if long term stability matters more than upfront simplicity.

Mulch Mound Pro Tip

A common mistake is ordering sand too early in spring before the ground has fully thawed and drained. With Pittsfield's last frost typically landing around May 19, working wet glacial till in April can cause your base layer to settle unevenly once the soil dries out. Waiting a few extra weeks for the ground to firm up saves you from redoing the job later in the season.

Mulch Mound Pro Tip

If your project needs both sand and gravel or chip stone, ordering them together in one delivery saves on repeated site visits and lets you stage materials in one trip. This matters more in Pittsfield than flatter regions, since many properties here have sloped driveways or limited turnaround space, and consolidating deliveries reduces how many times a truck has to navigate tight access points.

Working With Sand in Pittsfield

Pittsfield sits on glacial till, a mix of clay, silt, sand, and stone that does not drain or compact predictably on its own. Masons and hardscapers here bring in sand to get a uniform, controllable layer under pavers and in mortar mixes, something the native soil cannot offer. With frost pushing down into the ground from October through May, a properly bedded base matters more here than in milder climates, since freeze thaw cycles will expose weak spots fast. Hardscape crews around the City of Festivals tend to schedule sand deliveries tightly around their spring through fall build season.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical Pittsfield project?

Mason sand is used for mixing mortar, filling paver joints, and building pool bases. It is finer and more uniform than concrete sand, which is exactly what makes mortar workable and joints fill in evenly. It is not typically used as fill or for drainage work, those call for coarser materials.

Answer

How many cubic yards do I need for a paver patio?

At a 1 inch install depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs roughly one yard for bedding, plus a bit extra for joint filling. If you are going closer to 2 inches deep, plan on nearly double that amount.

Answer

When is the best time to install sand in Pittsfield?

Spring through fall is the active hardscape season here, but it is worth waiting until the ground has fully thawed and drained after Pittsfield's last frost around May 19. Installing on still wet glacial till can cause uneven settling once things dry out, so a few weeks of patience in early spring pays off.

Answer

Where will the sand be placed on delivery day?

The driver places the load wherever you specify at checkout, usually a driveway, staging area, or spot close to the work site. Just make sure the area is clear and accessible, and let us know ahead of time about any slopes, gates, or narrow access points common on some Pittsfield properties.

Answer

Should I use sand or chip stone under my pavers?

Sand has long been the standard paver bedding material, but chip stone is increasingly used instead because it will not pump or shift the way sand can during freeze thaw cycles. Sand still makes sense for mortar mixing and joint filling. For the structural base layer, ask us about chip stone if long term stability is your priority.

More delivery around Pittsfield, Massachusetts

All Pittsfield, Massachusetts landscape supply