Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Thanks! We received your request.
Something went wrong. Please try again.
One cubic yard covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, which is the typical range for mortar beds, paver joints, and pool base leveling. For a standard 200 square foot patio joint fill or bedding pass, most Providence customers order somewhere around three quarters of a yard to a full yard depending on depth. Order by the cubic yard and round up slightly, running short mid pour is worse than having a little extra on the pallet.
Couldn't load pickup availability
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
If your sand isn't the quantity or quality you ordered, we'll make it right.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
One cubic yard covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, which is the typical range for mortar beds, paver joints, and pool base leveling. For a standard 200 square foot patio joint fill or bedding pass, most Providence customers order somewhere around three quarters of a yard to a full yard depending on depth. Order by the cubic yard and round up slightly, running short mid pour is worse than having a little extra on the pallet.
Thanks! We received your request.
Something went wrong. Please try again.
Getting started is easy — just follow these simple steps
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select a delivery date you'd like for the product to be dropped off at your home
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!
Mason sand pairs with polymeric jointing sand, paver base gravel, or bagged mortar mix depending on whether you are setting stone or building with block. A lot of our Providence customers are also swapping out old sand paver bedding for clean chip stone since it does not pump or wash out the way sand can under freeze thaw cycles. If you are doing a pool install, ask about combining a sand base order with edging stone delivered the same trip.
Service area
Mason sand is finer and more uniform than concrete sand, which is exactly why it works in mortar joints but is a poor choice for paver base in a New England freeze thaw climate. It holds water at the surface and can pump up through joints during winter heave. If you are setting pavers in Providence, use mason sand for the joint fill on top but switch to compacted stone dust or chip stone underneath for the bedding layer.
A common mistake is ordering mason sand for pool base work and skipping compaction. Providence's silty loam subsoil holds moisture, so an uncompacted sand base can settle unevenly once the pool is filled and the weight sets in. Wet the sand lightly and tamp it in thin lifts before setting the liner, especially if your install falls right after a wet spring stretch when the ground underneath hasn't fully dried out yet.
Order slightly more than your calculated volume if you are mixing mortar on site, since spillage and mixer waste run higher with sand than with gravel. It is cheaper to have a few extra bags worth sitting covered on a tarp than to schedule a second small delivery mid job. If you are also ordering gravel or stone for the same project, ask about combining the load to cut down on separate delivery trips.
Providence sits on silty loam that holds water and gets soft in spring thaw, which is exactly when a lot of hardscape work starts here. Mason sand does not care about that, it is inert and drains, so it is the layer you want between wet native soil and mortar or pavers. With the growing season running frost to frost from late April to mid October, most sand orders here cluster around spring patio builds and fall pool closeouts before the ground firms up for winter. Around WaterFire season, plenty of patios and fire pit surrounds are being finished with sand-set stone.
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.
