• Reading PA Sand Delivery - Mulch Mound
  • Reading PA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Bill Doege
Bill Doege
Google Review

One cubic yard of mason sand spreads about 324 square feet at a 1 inch depth, and most paver joint or bedding work only needs 1 to 2 inches. A typical Reading patio or walkway project runs somewhere between half a yard and two yards depending on square footage and depth, so measure your area first and work backward from there. Ordering by the cubic yard means you get exactly the volume the job calls for without guessing at bag counts.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Reading Sand Delivery

Reading Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Bill Doege
Bill Doege
Google Review

One cubic yard of mason sand spreads about 324 square feet at a 1 inch depth, and most paver joint or bedding work only needs 1 to 2 inches. A typical Reading patio or walkway project runs somewhere between half a yard and two yards depending on square footage and depth, so measure your area first and work backward from there. Ordering by the cubic yard means you get exactly the volume the job calls for without guessing at bag counts.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Reading Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Mason sand pairs with pavers, brick, and block on most Reading jobs, and a lot of customers order crushed stone or gravel alongside it for a compacted base layer underneath. If you are doing a pool install, a locking paver joint sand or polymeric option is worth asking about since loose sand can wash out at the pool edge over time.

Reading Soil Delivery
Reading Mulch Delivery
Map of the sand delivery area around Reading, Pennsylvania

Service area

Areas we deliver sand in Reading, Pennsylvania

See All Locations
Mulch Mound Pro Tip

Mason sand for mortar work should stay dry until you are ready to mix, which is tricky in Reading given how often silt loam soil holds moisture at ground level after rain. Stockpile it on a tarp or pallet, not directly on wet ground, and cover it if rain is forecast within a day or two. Wet sand throws off your mortar ratio and makes the mix inconsistent from batch to batch, which shows up as color and strength variation in the finished brickwork.

Mulch Mound Pro Tip

A common mistake on paver jobs here is using mason sand as the bedding layer under the pavers themselves instead of just the joint fill. Mason sand is fine and uniform, which means it can pump up through joints or wash out under freeze thaw cycles across a Reading winter. Chip stone bedding underneath, with mason or polymeric sand only in the joints on top, holds up far better through repeated frost heave seasons.

Mulch Mound Pro Tip

If you are mixing mortar and filling paver joints on the same project, order both needs as one delivery rather than two separate small loads, since it is more efficient to size one yard total than to underorder twice. Hardscape season here runs spring through fall, so ordering early in that window avoids the scheduling crunch that hits every supplier once good weather arrives and everyone starts projects at once.

Working With Sand in Reading

Reading sits on silt loam that holds water and compacts differently than sandy soil, which is exactly why mason sand matters here as a controlled, predictable base material instead of relying on native ground. With frost reaching down through mid October to late April, anything set in sand for pavers or steps needs a stable bedding layer that will not shift as the ground freezes and heaves. Most jobs around here are mortar mixing for brick and block work, paver joint filling on patios, and pool base leveling before liner installation. The fine grind is what lets a trowel actually work the mix instead of fighting coarse grains.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is the difference between mason sand and regular sand from a hardware store?

Mason sand is washed and screened to a fine, uniform grain size, which is what makes it workable for mortar mixing and tight enough for paver joints. Bagged hardware store sand is often coarser or less consistent, which shows up as gritty mortar or joints that do not pack evenly. Ordering it in bulk by the yard also guarantees a consistent batch across your whole project.

Answer

How many cubic yards of mason sand do I need for a patio project?

One cubic yard covers about 324 square feet at a 1 inch depth, and most patio joint fill or bedding work uses 1 to 2 inches. Measure your patio square footage, decide your depth, and divide by the coverage rate to land on a yardage figure. Most Reading patio jobs fall between half a yard and two yards.

Answer

When is the best time to schedule a mason sand delivery in Reading?

Hardscape projects here run heaviest from spring through fall, once the ground is workable and clear of frost, which typically lifts by late April. Ordering ahead of peak season, rather than during it, tends to make scheduling easier. Sand itself is not weather sensitive to store, so timing is really about your project readiness, not the material.

Answer

Where will the sand be dropped and can the truck access a tight driveway?

The load is placed at a spot on your property that you specify at checkout, typically a driveway or curbside area with clear overhead clearance. Delivery trucks are large, so tight or narrow driveways may need the load left closer to the street. Let us know about access constraints so the drop location works on delivery day.

Answer

Should I use mason sand or chip stone under my pavers?

For paver bedding specifically, chip stone has become the more common choice since it does not pump or wash out under joints the way fine mason sand can, especially through freeze thaw cycles. Mason sand still makes sense for the joint fill layer on top and for mortar mixing. If your project is mostly joint work rather than a full base, mason sand is the right call.

More delivery around Reading, Pennsylvania

All Reading, Pennsylvania landscape supply