• Salisbury NY Sand Delivery - Mulch Mound
  • Salisbury NY Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

At a 1 inch depth, one cubic yard covers about 324 square feet, and most mortar or paver joint work only needs a 1 to 2 inch layer, so a single yard often handles a mid size patio project. Because this sand weighs about 1.35 tons per cubic yard, even a modest 2 to 3 yard order gets heavy fast, so measure your joint area or mortar batch needs before ordering rather than guessing high.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Salisbury Sand Delivery

Salisbury Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

At a 1 inch depth, one cubic yard covers about 324 square feet, and most mortar or paver joint work only needs a 1 to 2 inch layer, so a single yard often handles a mid size patio project. Because this sand weighs about 1.35 tons per cubic yard, even a modest 2 to 3 yard order gets heavy fast, so measure your joint area or mortar batch needs before ordering rather than guessing high.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Salisbury Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Most paver jobs still need a base layer of compacted gravel or paver base underneath before this sand ever gets used in the joints. If you are mixing mortar, you will also want cement and your aggregate on hand before the load arrives. Some crews around Salisbury have started swapping this for clean chip stone in paver bedding since it will not pump out under freeze thaw cycles, worth asking about if that is your use case.

Salisbury Soil Delivery
Salisbury Mulch Delivery
Map of the sand delivery area around Salisbury, New York

Service area

Areas we deliver sand in Salisbury, New York

See All Locations
Mulch Mound Pro Tip

Mason sand needs to be bone dry or close to it before you mix mortar with it, and Salisbury humidity swings can leave a pile damp overnight even under a tarp. Uncover it and let it air for an hour on a dry day before mixing, or your mortar ratio will be off and you will end up adding extra cement to compensate, which changes cure time and strength.

Mulch Mound Pro Tip

A common mistake is using this sand as paver bedding under freeze thaw conditions, which Salisbury sees every winter between November and April. Fine sand can migrate and pump up through joints as the ground heaves, leaving uneven pavers by spring. If you are doing a paver base, ask about chip stone instead and save the mason sand for joints and mortar only.

Mulch Mound Pro Tip

If your project only needs joint filling, order a half yard rather than a full yard, since a little goes a long way at 1 inch depth over 324 square feet. Pair the order with your gravel base delivery on the same call if you are starting a patio from scratch, it saves a second delivery fee and gets both materials on site before your crew starts.

Working With Sand in Salisbury

Salisbury already sits on sandy loam, so this material is not here to fix your soil, it is here for construction work. Most calls we get are hardscape projects, patios, walkways, and pool decks going in around the Hempstead Plains neighborhoods where a lot of mid century homes are finally getting their concrete slabs replaced. With hardscape season running spring through fall here, this sand moves fastest from April through October. It is not a substitute for paver base stone or fill sand, it is a finishing and bonding material.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is what is commonly called mason sand, washed and finely screened for mortar mixing, paver joints, and similar fine work. It is finer and more uniform than concrete sand, which is why it works better for mortar consistency and tight paver joints.

Answer

How many cubic yards do I need for a patio's paver joints?

At a 1 inch depth, one cubic yard covers roughly 324 square feet, but paver joints only use a fraction of that footprint since you are filling gaps, not the whole surface. Most standard patios need a quarter to half yard for joint sand alone, order a full yard if you are also mixing mortar.

Answer

When is the best time to do paver or patio work in Salisbury?

Spring through fall is prime hardscape season here, roughly April through October, once the ground is workable after last frost around April 10 and before the first frost hits around November 17. Mortar work especially needs above freezing temperatures to cure properly, so avoid late fall installs.

Answer

Where will the sand be dropped off?

We place the load wherever you specify at checkout, typically a driveway or curbside spot with truck access. Make sure the area is clear and reachable, since a cubic yard of sand at 1.35 tons is not something you want to move far by hand.

Answer

Should I use this sand or chip stone for paver bedding?

For paver joints and mortar mixing, mason sand is still the right choice. But for bedding under pavers, many Salisbury crews have moved to clean chip stone since it resists pumping and shifting through freeze thaw cycles, which this fine sand is prone to over time.

More delivery around Salisbury, New York

All Salisbury, New York landscape supply