About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs run 6 to 12 inches depending on how much grade you need to make up. Measure the low area in square feet, decide your depth, and work backward from there, doubling the yardage if you are going a full 12 inches. Fill dirt weighs about 1.3 tons per cubic yard, so for anything over a few yards, plan for where a heavy load can actually sit.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Sioux Falls Fill Dirt Delivery

Sioux Falls Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs run 6 to 12 inches depending on how much grade you need to make up. Measure the low area in square feet, decide your depth, and work backward from there, doubling the yardage if you are going a full 12 inches. Fill dirt weighs about 1.3 tons per cubic yard, so for anything over a few yards, plan for where a heavy load can actually sit.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Sioux Falls Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill dirt jobs finish with a topsoil cap, since fill is a structural base and will not support grass or plants on its own. Some Sioux Falls customers also order a layer of gravel underneath in wet areas for added drainage before backfilling. If you are building up around a pool or foundation, having both fill and topsoil scheduled together keeps the project moving without a second delivery wait.

Map of the fill dirt delivery area around Sioux Falls, South Dakota

Service area

Areas we deliver fill dirt in Sioux Falls, South Dakota

Mulch Mound Pro Tip

With silty clay as the base soil under most Sioux Falls lots, do not dump fill dirt straight onto wet ground. Clay holds moisture and if you build on top of it while it is saturated, the fill will settle unevenly as the clay dries and shifts underneath. Wait for a dry stretch, scrape any standing water or mud from the area first, then place your first lift. It is a small delay that avoids a much bigger regrading job later.

Mulch Mound Pro Tip

The most common mistake with fill dirt is treating it like topsoil and expecting anything to grow in it. Fill dirt is subsoil, screened of debris but stripped of the organic content plants need. Always cap the final surface with 4 to 6 inches of real topsoil before seeding or planting, and keep that topsoil as a separate order so you are not paying to move extra material you do not need as deep fill.

Mulch Mound Pro Tip

If your project needs both fill and topsoil, order them together and have the fill placed first at the bottom of the work area, since it is heavier and cheaper by volume to move in bulk. This also lets the delivery truck access the site once instead of twice, which matters on tighter Sioux Falls lots near older neighborhoods where truck access to the backyard can be limited.

Grading and Filling in Sioux Falls

Sioux Falls yards are built on silty clay, which compacts slowly and holds water longer than sandy soil, so low spots near foundations and around pools tend to stay soggy through spring thaw. Fill dirt gets used here to raise those areas before the frost and thaw cycle between May and September does more damage to slabs and patios. Because it is subsoil, not topsoil, it will not grow anything on its own, which is exactly why builders use it to get grade right first and cap with topsoil after. With elevation already at 1,430 feet and drainage often an afterthought in older neighborhoods near Falls Park, getting the base grade right matters more than most homeowners expect.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil in Sioux Falls?

No, fill dirt is subsoil pulled from excavation sites and screened of rocks and debris, while topsoil has organic matter that supports plant growth. Fill dirt is used to raise grade and backfill, then capped with topsoil where grass or landscaping goes on top. Ordering the wrong one for your project usually means a second delivery.

Answer

How many cubic yards of fill dirt do I need to raise a low spot?

One cubic yard covers about 54 square feet at 6 inches deep, so a 200 square foot low area at that depth needs roughly 4 cubic yards. If you are going 12 inches instead, double that to about 8 yards. Measure your area first and decide on depth before ordering.

Answer

Do I need to compact fill dirt before building on it in Sioux Falls?

Yes, especially on the silty clay common here, which settles unevenly if fill is dumped in deep and left alone. Place it in 6 to 8 inch lifts and compact each one before adding the next. Skipping this step is why some yards keep sinking for two or three years after a project looks finished.

Answer

Where will the fill dirt be placed on delivery day?

The truck places the full load in one spot as close to your work area as access allows, since fill dirt is too heavy to spread on delivery. Clear a path and a flat drop zone beforehand, and have a wheelbarrow or equipment ready if the fill needs to move further into the yard.

Answer

Should I order fill dirt or topsoil for backfilling around my foundation?

Fill dirt is the right choice for backfilling around foundations, since it is a structural material meant to be compacted and it will not shift or wash out like loose topsoil can. Save topsoil for the final few inches if grass or landscaping is going in on top. Mixing the two roles usually costs more in regrading later.

More delivery around Sioux Falls, South Dakota

All Sioux Falls, South Dakota landscape supply