About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

One cubic yard covers about 54 square feet at a 6 inch depth, so a 20 by 20 foot low spot at 6 inches runs close to 4 cubic yards. For deeper fills, figure your total cubic footage and divide by 27, then round up since compaction will eat into your final grade. Most foundation backfill or pool jobs run in the 6 to 12 inch depth range per lift.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Spokane Fill Dirt Delivery

Spokane Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

One cubic yard covers about 54 square feet at a 6 inch depth, so a 20 by 20 foot low spot at 6 inches runs close to 4 cubic yards. For deeper fills, figure your total cubic footage and divide by 27, then round up since compaction will eat into your final grade. Most foundation backfill or pool jobs run in the 6 to 12 inch depth range per lift.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Spokane Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a topsoil cap once the fill is compacted, especially if lawn, beds, or anything living goes on top. If the finished area needs drainage work first, a layer of gravel or crushed rock under the fill line helps keep water from pooling against a foundation. Pair fill dirt with whatever caps the job, not with mulch or bark, which serve a different purpose entirely.

Mulch Mound Pro Tip

Spokane's ground freezes hard by early October and stays locked until around May, so any fill job that needs the material to settle and compact properly before you build on it should happen well before the fall freeze. Compacting frozen or half frozen fill doesn't work, it just traps ice pockets that thaw into voids come spring. If you're backfilling a foundation, aim to finish before the first week of October.

Mulch Mound Pro Tip

The biggest mistake on fill jobs is dumping the whole load in at once and calling it done. Fill dirt needs to go in 6 to 8 inch lifts, each one compacted before the next goes on, or the ground keeps settling for years, cracking patios and pulling gaps open along foundations. It takes longer but it's the difference between a pad that holds and one you're patching again in two summers.

Mulch Mound Pro Tip

Fill dirt is subsoil, not topsoil, and it has no business growing anything, so don't pay for a nutrient rich blend when you're just raising grade or backfilling a wall. Save the better material budget for a topsoil cap on top, where roots actually sit. Ordering exact yardage instead of rounding way up also keeps a job from turning into a pile of leftover dirt nobody wants.

Grading and Filling in Spokane

Spokane sits at 1,843 feet with volcanic loam as the native soil, which drains fine on its own but doesn't always sit at the grade a builder needs. Fill dirt gets used here to correct that, raising low spots near foundations, leveling ground before a patio pour, or building a pad up before topsoil goes down for anything green. Because the ground freezes by early October and doesn't fully thaw until May, contractors push fill jobs hard in the shoulder seasons before frost locks up excavation work. This isn't a growing medium, it's structural material that has to be compacted right or it settles for years under a driveway or foundation.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil for my Spokane yard?

No, fill dirt is subsoil screened of debris, used for raising grade and backfilling, not for growing anything. If you're planting lawn or beds on top, you'll want a topsoil cap over the compacted fill. Volcanic loam is Spokane's native topsoil, and it's not what you're getting in a fill dirt order.

Answer

How many cubic yards do I need to fill in a low spot by my foundation?

One cubic yard covers roughly 54 square feet at 6 inches deep, so measure your area and depth first. A 10 by 15 foot spot at 6 inches needs about 3 cubic yards, but round up since compaction settles the material 10 to 20 percent once it's tamped down.

Answer

Can I install fill dirt in winter with Spokane's frost?

It's not ideal. Ground freezes here by early October and doesn't thaw until around May, and compacting frozen fill traps ice pockets that create voids when it thaws. Plan foundation and grading fill work for spring through early fall so you get real compaction before winter sets in.

Answer

Where does the truck place the fill dirt on delivery?

The load gets dropped in one spot that your truck can access, since fill dirt arrives loose and heavy rather than spread across the yard. Clear a path and a landing zone before your scheduled date, and plan on moving it in lifts if you're filling a deep area yourself.

Answer

Should I use fill dirt or gravel to build up my yard before a patio?

It depends on drainage. Fill dirt compacts solid and works fine for raising grade generally, but if water tends to collect in that spot, a gravel base under the fill helps it drain instead of holding moisture against a foundation. For most simple grade raising jobs in Spokane, fill dirt alone compacted in lifts is enough.

More delivery around Spokane, Washington

All Spokane, Washington landscape supply