About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

At a 1 inch install depth, one cubic yard of sand covers about 324 square feet, so a typical paver patio or walkway job usually runs somewhere between half a yard and two yards depending on footprint. Mortar mixing jobs are smaller and measured by the batch, so order based on your mix ratio rather than square footage. Always round up slightly, running short mid pour is worse than having a little left over.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Syracuse Sand Delivery

Syracuse Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

At a 1 inch install depth, one cubic yard of sand covers about 324 square feet, so a typical paver patio or walkway job usually runs somewhere between half a yard and two yards depending on footprint. Mortar mixing jobs are smaller and measured by the batch, so order based on your mix ratio rather than square footage. Always round up slightly, running short mid pour is worse than having a little left over.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Syracuse Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most sand orders in Syracuse pair with paver base stone or crushed gravel for the compacted subgrade, since clay soil needs that extra structural layer before sand goes down. If you are doing paver joints, polymeric sand is worth considering instead for better joint stability against freeze thaw. For pool installs, a geotextile fabric layer between clay and sand cuts down on long term settling.

Map of the sand delivery area around Syracuse, New York

Service area

Areas we deliver sand in Syracuse, New York

Mulch Mound Pro Tip

Syracuse clay does not drain well, so if you are setting pavers directly over native soil without a proper base course, sand alone will not stop movement. Excavate down to a compacted gravel base first, then add your 1 to 2 inch sand layer on top for screeding. Skipping the gravel base is the single most common reason paver patios in clay soil areas heave and shift within a couple winters.

Mulch Mound Pro Tip

Mason sand for paver joints has mostly been replaced by polymeric sand or clean chip stone in this region, because plain sand pumps out from under pavers during freeze thaw cycles and washes out in heavy rain. If you are doing joint fill rather than mortar mixing, ask about chip stone instead, it locks in place and does not migrate the way loose sand does.

Mulch Mound Pro Tip

Order your sand and any base gravel in the same delivery when possible, since coordinating one drop saves a second trip charge and lets you build the base and set the sand layer in the same work session. Spring and fall are the busiest hardscape windows here, so if your project has any flexibility, ordering mid summer often means faster scheduling.

Working With Sand in Syracuse

Syracuse sits on heavy clay soil that holds water and heaves with every freeze thaw cycle, which is exactly why sand matters here for anything you are setting pavers or block on. A stable sand base under a patio or walkway resists the frost heave that clay alone will produce every winter. Mason sand also shows up constantly in mortar mixes for the brick and block work common on older Syracuse homes near campus and downtown. With first frost arriving by mid October, most of this work needs to wrap before the ground starts working against you.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is the difference between mason sand and paver base sand for my patio project?

Mason sand is finer and more uniform, built for mortar mixing where workability matters. For paver bedding, many contractors in this area now use clean chip stone instead, since it resists pumping and shifting under freeze thaw better than sand does. If your project is a paver patio, ask which is right for your specific base design.

Answer

How much sand do I need for a 300 square foot patio base?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs just under one cubic yard. If you are going with a 2 inch base for extra stability against Syracuse's clay soil, plan on close to two cubic yards instead.

Answer

When is the best time to install a sand base for pavers in Syracuse?

Spring through fall is hardscape season here, with most work happening after the last frost around May 1 and wrapping up before first frost hits around October 10. Working outside that window means fighting frozen or waterlogged clay subgrade, which makes proper compaction difficult.

Answer

Where will the sand be dropped and do I need to be home?

Delivery is scheduled at checkout and the load gets placed in your driveway or another accessible spot you specify. You do not need to be present, but make sure the drop area is clear and reachable by truck, especially if your property has a slope or soft ground from clay drainage.

Answer

Should I use sand or polymeric sand for paver joints on my project?

For joint fill, polymeric sand or chip stone generally outperforms plain mason sand, since it resists washout and does not pump out from freeze thaw movement common in this region. Mason sand is better suited to mortar mixing or as a leveling layer under a paver base rather than the joints themselves.

More delivery around Syracuse, New York

All Syracuse, New York landscape supply