I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the typical spread for paver joint filling or a bedding layer. For mortar mixing you will use far less per yard since it gets blended with cement rather than spread flat, so estimate by batch volume instead of square footage. Most patio or walkway jobs in Trenton run somewhere between a quarter yard and a full yard depending on the footprint.
What is a Yard?
What is a Yard?
FAQs
FAQs
Trenton Sand Delivery
Trenton Sand Delivery
Regular price
$74.00
per
Yard
Regular price
Sale price
$74.00
Unit price
per
Shipping calculated at checkout.
Minimum of 3 Yard
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local sand, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your sand isn't the quantity or quality you ordered, we'll make it right.
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the typical spread for paver joint filling or a bedding layer. For mortar mixing you will use far less per yard since it gets blended with cement rather than spread flat, so estimate by batch volume instead of square footage. Most patio or walkway jobs in Trenton run somewhere between a quarter yard and a full yard depending on the footprint.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Sand pairs naturally with paver base gravel underneath and edging material to hold the joints once they are filled. For repointing or mortar work, most Trenton crews order the sand alongside their cement separately rather than a pre-mixed product, since it gives more control over the mix ratio. If you are setting a paver patio, some crews are switching to clean chip stone for the bedding layer since it does not pump moisture up through the joints the way sand can.
Service area
Areas we deliver sand in Trenton, New Jersey
Mulch Mound Pro Tip
Mason sand is finer and more uniform than concrete sand, which is exactly why it works better for mortar. If you use a coarser sand in a mortar mix, the joints will look grainy and the mix will be harder to tool smoothly between bricks. For repointing older Trenton brick, which is common near the State House and older residential blocks, stick with mason sand and keep your mix ratio consistent across the whole wall so the color and texture match.
Mulch Mound Pro Tip
A common mistake with paver joint sand is filling joints when the pavers are still damp from rain or morning dew. The sand clumps instead of settling into the joint fully, leaving gaps that let weeds in later. In Trenton's spring and fall shoulder seasons, wait for a dry afternoon after the dew burns off, usually midday, before sweeping sand into joints for the best compaction.
Mulch Mound Pro Tip
If your project is a paver patio rather than mortar work, consider chip stone instead of sand for the bedding layer. It has been replacing sand in a lot of hardscape jobs because it will not pump up through joints under freeze thaw cycles, which matters in a zone 7a climate like Trenton's where the ground does freeze several times each winter. Sand still wins for mortar and pool base work where a finer material is needed.
Working With Sand in Trenton
Trenton sits on clay loam soil that drains slowly, which means sand used for structural or drainage purposes needs to be paired with proper base prep rather than relied on alone. Most of the calls we get here are for hardscape work around the State House area and older Capital City neighborhoods where brick paver walkways and patios are common. Mason sand fills paver joints tightly and mixes into workable mortar for the repointing work that a lot of Trenton's older brick and stone buildings still need. Because our elevation here is low and humidity runs high in summer, sand for mortar work is best kept covered and dry until use.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.