About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you are raising. For a small backfill job around a foundation wall, figure your square footage and depth first, then order in full yards since partial loads still get billed by volume. Bigger regrades or pool backfills easily run 15 to 40 yards, and it is worth measuring twice since fill dirt is heavy to move a second time if you order short.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Vancouver Fill Dirt Delivery

Vancouver Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you are raising. For a small backfill job around a foundation wall, figure your square footage and depth first, then order in full yards since partial loads still get billed by volume. Bigger regrades or pool backfills easily run 15 to 40 yards, and it is worth measuring twice since fill dirt is heavy to move a second time if you order short.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Vancouver Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill dirt jobs finish with a few inches of topsoil on top once the fill is compacted, since fill dirt itself is not meant to grow anything. If the finished grade will see traffic or drainage, a layer of gravel or crushed rock underneath or around the fill can help with stability. Mulch comes in later, once the topsoil and any planting beds are in place.

Mulch Mound Pro Tip

Do not dump fill dirt in one deep pile and call it done. Place it in lifts of 6 to 8 inches and compact each layer with a plate compactor or hand tamper before adding the next. Skipping this step is the number one reason people see their patio or shed pad sink a few inches over the following winter, especially in ground that holds moisture like the volcanic loam common around Vancouver.

Mulch Mound Pro Tip

Fill dirt is not topsoil and will not support turf or plants on its own. If the finished area needs grass, beds, or anything green, cap the compacted fill with 4 to 6 inches of actual topsoil before planting. Skipping this step means whatever you plant will struggle in dense, nutrient poor subsoil no matter how well you water it.

Mulch Mound Pro Tip

Order fill dirt and topsoil as separate deliveries rather than trying to blend them yourself on site. It is cheaper per yard to move structural fill dirt in bulk and cap it with a thinner topsoil layer than to buy one blended product for the whole depth, and you get better compaction control by keeping the two materials distinct during install.

Grading and Filling in Vancouver

Vancouver sits at a low 171 feet with a lot of flat ground near the Columbia, and volcanic loam here compacts unevenly once it gets saturated through the wet winter months leading up to that November 10 frost. That combination means a lot of yards develop soggy low spots or settle unevenly near foundations and patios over a few years. Fill dirt is what fixes that, not by adding nutrients but by adding structural mass you compact in place. Around Fort Vancouver and the older neighborhoods with mature grading, we see a steady need for it ahead of hardscape and pool projects rather than tied to any particular season.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level a soggy spot in my backyard in Vancouver?

Yes, that is one of the most common uses for it here. Volcanic loam holds water and low spots tend to stay wet through the winter. Fill dirt raises the grade so water sheds properly, but compact it in 6 to 8 inch lifts as you go, and plan to cap it with topsoil if grass or plants will go on top.

Answer

How many cubic yards of fill dirt do I need for a 200 square foot area?

At a 6 inch depth, one yard covers about 54 square feet, so 200 square feet needs roughly 3.7 yards, round up to 4. If you are going deeper, say 12 inches, double that to around 7.5 yards, and always order a bit extra since compaction will settle the fill lower than it looks fresh.

Answer

When is the best time to bring in fill dirt before Vancouver's rainy season hits?

Fill dirt is more project driven than seasonal, but compacting it is easier when the ground is not saturated. Aim to get it placed and compacted before the wetter stretch that runs into the November 10 frost, since compacting wet volcanic loam is harder and less reliable than working in a drier window.

Answer

Where will the delivery truck place the fill dirt on my property?

The driver dumps the load wherever you direct on delivery day, typically curbside or in a driveway, since the material is too heavy to hand carry far. Clear the access path ahead of time and have your spot picked out, and keep in mind trucks need reasonable clearance to back in.

Answer

What is the difference between fill dirt and topsoil for my project?

Fill dirt is subsoil meant for structural jobs like raising grade or backfilling, it is not meant to grow anything. Topsoil is the nutrient rich layer you cap fill dirt with when the finished area needs grass or plants. Most grading jobs need both, fill dirt for bulk and topsoil as the finish layer.

More delivery around Vancouver, Washington

All Vancouver, Washington landscape supply