About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and this sand is typically installed at 1 to 2 inches depending on whether it is bedding a paver base or filling joints. For joint filling on an average patio, a fraction of a yard often does it, while a full paver bed under a walkway or patio will need the full depth calculation. Measure your square footage first, then decide on depth based on the job type before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Watertown Sand Delivery

Watertown Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard covers about 324 square feet at a 1 inch depth, and this sand is typically installed at 1 to 2 inches depending on whether it is bedding a paver base or filling joints. For joint filling on an average patio, a fraction of a yard often does it, while a full paver bed under a walkway or patio will need the full depth calculation. Measure your square footage first, then decide on depth based on the job type before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Watertown Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most orders here pair this sand with paver base gravel or clean chip stone for the structural layer underneath, since chip stone has become the preferred bedding choice over sand for jobs that need to resist pumping. Mortar mix and cement are the natural companions for masonry work around the older brick and stone buildings common in this city. If you are setting a pool base, a layer of crushed stone underneath is worth considering for drainage.

Map of the sand delivery area around Watertown, New York

Service area

Areas we deliver sand in Watertown, New York

Mulch Mound Pro Tip

For paver joints, sweep this sand in dry and mist lightly with water to help it settle before compacting, rather than soaking it. Watertown's freeze thaw cycles will work loose sand out of joints over a winter or two if it is not compacted properly the first time, so take the extra pass with a plate compactor before calling the job done.

Mulch Mound Pro Tip

A common mistake is ordering this sand for paver bedding out of habit. Many contractors here have shifted to clean chip stone under pavers because it locks together and will not pump up through joints the way sand can after repeated freeze thaw cycles. Save this sand for mortar and joint work and use chip stone for the structural base layer instead.

Mulch Mound Pro Tip

If you are mixing mortar for a masonry repair on one of the older brick buildings near downtown, buy slightly more sand than the math suggests since small batches waste material and a bulk cubic yard order costs less per use than repeated small bag purchases from a hardware store.

Working With Sand in Watertown

Watertown sits on silt loam that holds water and turns heavy after the spring thaw, which is exactly when most hardscape jobs here start. This sand does not fight that condition since it is used above grade, in mortar joints and bedding rather than mixed into the native soil. With last frost running to mid May and first frost by early October, the building window is real but not long, so masons and patio crews tend to order what they need in one delivery rather than staging multiple small runs. It also holds up in pool base work, which sees steady demand around the lake properties outside the city core.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is the material often called mason sand in other parts of the country. It is washed and finely screened, which is what makes it workable for mortar mixing and fine enough for paver joints and pool base applications.

Answer

How much sand do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth. For paver joint filling you typically need far less than a full bed depth, so measure your patio square footage and figure a thin layer, usually a fraction of a yard for an average size patio.

Answer

When is the best time to install this in Watertown?

Hardscape work runs spring through fall here, after the last frost around May 12 and before the ground starts hardening toward the October frost date. Working within that window gives mortar and jointed sand time to cure and settle before winter freeze thaw cycles begin.

Answer

Where does the truck put the sand on delivery day?

The load is dropped in one spot that your driveway or access area can accommodate, so clear a space before the truck arrives. Delivery is scheduled at checkout, and you will want a path wide enough for a full size delivery truck to reach the drop point.

Answer

Should I use this sand or chip stone under my pavers?

Many contractors here have moved away from sand bedding under pavers in favor of clean chip stone, which locks together and resists pumping through joints over repeated freeze thaw seasons. This sand still works well for joint filling and mortar, just consider chip stone for the structural base layer.

More delivery around Watertown, New York

All Watertown, New York landscape supply