• Waukesha WI Sand Delivery - Mulch Mound
  • Waukesha WI Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches, so a single yard often handles a decent sized patio or walkway project. Pool base installs and mortar mixing tend to use less material overall since you're not covering broad open ground. Measure your actual project footprint first, since sand is dense at 1.35 tons per cubic yard and it's easy to over order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

FAQs

Read all FAQs

Waukesha Sand Delivery

Waukesha Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches, so a single yard often handles a decent sized patio or walkway project. Pool base installs and mortar mixing tend to use less material overall since you're not covering broad open ground. Measure your actual project footprint first, since sand is dense at 1.35 tons per cubic yard and it's easy to over order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Waukesha Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Sand pairs naturally with paver base gravel underneath and edging material to hold the joints in place once the sand is swept in. If you're doing a mortar project, you'll also want your stone or block on site before the sand arrives so the timeline stays tight. Some Waukesha customers pair this sand with chip stone for paver joints when they want better long term stability than sand alone offers.

Waukesha Soil Delivery
Waukesha Mulch Delivery
Map of the sand delivery area around Waukesha, Wisconsin

Service area

Areas we deliver sand in Waukesha, Wisconsin

See All Locations
Mulch Mound Pro Tip

Mason sand's fine, uniform grain is what makes mortar workable, but that same fineness means it holds water. In Waukesha's clay heavy ground, don't stockpile it directly on soil overnight before a rain, it'll pick up moisture and clump, throwing off your mortar mix ratios. Tarp the pile if rain is forecast, especially during the unpredictable spring stretch before the last frost clears in mid May.

Mulch Mound Pro Tip

A common mistake on paver jobs here is using mason sand for the joints instead of the base or bedding layer it's suited for. It's finer than concrete sand and tends to wash out or erode under freeze thaw cycles typical of zone 5b winters. If you're finishing joints on a patio near Frame Park or anywhere with foot traffic, consider chip stone instead, since it locks in place and doesn't pump out from underneath pavers.

Mulch Mound Pro Tip

If your project involves both a paver base and joint filling, order concrete sand or chip stone for the base and reserve mason sand specifically for mortar mixing or pool pad leveling. Combining materials this way avoids paying for the finer, more processed sand where a coarser product would do the job just as well, and it keeps your cubic yard count accurate instead of overbuying one material to cover multiple uses.

Working With Sand in Waukesha

Waukesha sits on silty clay loam, which holds water and gets sticky when wet, so builders here often bring in sand specifically to create a stable, free draining layer that the native soil won't give them. With hardscape season running spring through fall between the last frost on May 15 and first frost on Sept 30, most sand orders in town go toward mortar work, paver joints, and pool base prep during those warmer months. In zone 5b, freeze thaw cycles can shift anything laid on unstable ground, so a properly screeded sand base matters more here than in milder climates. Around Frame Park and other older neighborhoods with mature patios, homeowners are increasingly replacing paver joint sand with chip stone since it resists washout and ant tunneling.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for around Waukesha?

Locally it's mostly used for mixing mortar, filling paver joints, and leveling bases under above ground pools. It's finer and more uniform than concrete sand, which is why masons prefer it for workability. Some homeowners are shifting away from it for paver joints in favor of chip stone, which holds up better against Waukesha's freeze thaw cycles.

Answer

How many cubic yards do I need for a patio paver joint job?

One cubic yard covers about 324 square feet at a 1 inch depth, but joint filling uses far less volume than a full coverage layer since you're only filling gaps. For most residential patios, a fraction of a yard is enough, so check with us before over ordering a full yard for joints alone.

Answer

When is the best time to schedule a sand delivery for hardscaping?

Most hardscape work in Waukesha happens between the last frost around May 15 and first frost around Sept 30, so spring through fall is when material moves fastest. Working within that window means your mortar or base material won't be sitting exposed to freeze conditions before you can use it.

Answer

Where will the sand be placed when it's delivered?

You choose the drop location when you schedule delivery at checkout, ideally somewhere flat and accessible near your work area since sand is heavy and awkward to move far by hand. Make sure the path is clear of low branches or tight turns for the delivery truck.

Answer

Should I use mason sand or chip stone for my paver joints?

Mason sand has been the traditional choice, but many installers now use chip stone instead since it resists washout and doesn't pump out from underneath pavers over time. Mason sand still makes sense for mortar mixing or pool base leveling where its fine, uniform texture is actually the advantage.

More delivery around Waukesha, Wisconsin

All Waukesha, Wisconsin landscape supply