About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical patio or walkway project usually needs a fraction of a yard once you account for joint filling versus a full bedding layer. Mortar mixing projects are sized by batch rather than square footage, so estimate by the number of mixes you expect rather than area. Most West Allis jobs, from a paver walkway to a pool base prep, land well within a single yard delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

West Allis Sand Delivery

West Allis Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical patio or walkway project usually needs a fraction of a yard once you account for joint filling versus a full bedding layer. Mortar mixing projects are sized by batch rather than square footage, so estimate by the number of mixes you expect rather than area. Most West Allis jobs, from a paver walkway to a pool base prep, land well within a single yard delivery.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of West Allis Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Paver bedding jobs often pair this sand with a base layer of crushed stone for structure and drainage, especially given West Allis's silt loam holding water longer than sandier soils. Mortar projects usually need portland cement on hand separately. If you are shifting to chip stone for paver bedding instead of sand, we can help you compare both for your specific layout.

Mulch Mound Pro Tip

If you are bedding pavers, know that many West Allis contractors have shifted from mason sand to clean chip stone for that exact use, because chip stone locks together and does not pump up through joints the way sand can after freeze thaw cycles. Sand still wins for actual mortar mixing and joint sweeping, where its fine, uniform grain gives workable, consistent results a coarser material cannot match.

Mulch Mound Pro Tip

Sand delivered in fall, right before West Allis's typical October 23 first frost, should be tarped or moved under cover if it will sit more than a couple weeks. Repeated freeze and thaw on an exposed pile can clump the surface layer, which is a hassle when you go to mix mortar in spring and hit a crust.

Mulch Mound Pro Tip

Order slightly more than your calculated mortar volume rather than less, since running short mid mix means a delay while more material arrives, and dry mixed mortar does not store well once cement is blended in. A little extra sand left over costs far less hassle than a stalled crew waiting on a second delivery mid project.

Working With Sand in West Allis

West Allis sits on silt loam, a soil that holds water and turns slick when saturated, so drainage matters on any hardscape project here. This sand is not for leveling a soggy backyard, it is for bedding pavers near Wisconsin State Fair Park driveways or mixing mortar for a block wall. Because winters bring real frost through late October to early May, joints and bases need consistent material that will not shift as the ground freezes and thaws. Fine, uniform sand compacts predictably, which matters when frost heave is part of the yearly cycle here.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened natural sand, the same product often called mason sand in other parts of the country. It is finer and more uniform than concrete sand, which is exactly why it works well for mortar mixing and paver joint filling.

Answer

How many cubic yards do I need for a paver patio?

At a 1 inch bedding depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs roughly one yard for the bedding layer alone. Joint filling uses much less, often a fraction of a yard, since you are only filling narrow gaps rather than a full layer.

Answer

When is the best time to install a sand base in West Allis?

Spring through fall is the practical window, since West Allis sees frost from late October through early May and you want the ground workable and dry enough to compact properly. Late spring after the last frost on May 1 tends to give the most predictable conditions for hardscape work.

Answer

Where will the sand be dropped on delivery day?

The load is dumped at a single accessible spot, usually a driveway or curbside area, rather than spread or wheelbarrowed to a backyard location. Make sure there is clear space for the truck and enough room for the pile before your scheduled delivery.

Answer

Should I use sand or chip stone under my pavers?

Sand has traditionally been used for paver bedding, but many installers now prefer clean chip stone because it interlocks and resists pumping up through joints after freeze and thaw, which is common in West Allis winters. Sand is still the better choice for mortar mixing and joint sweeping where fine, uniform grain matters most.

More delivery around West Allis, Wisconsin

All West Allis, Wisconsin landscape supply