I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and typical install depth for joint filling or mortar prep runs 1 to 2 inches. For a standard 200 square foot patio's paver joints, a fraction of a yard usually does it, but mortar mixing on a bigger masonry job can eat through a full yard fast. Order by the cubic yard and size up slightly if you are mixing mortar on site, since mix ratios vary by trade.
What is a Yard?
What is a Yard?
FAQs
FAQs
Alpharetta Sand Delivery
Alpharetta Sand Delivery
Regular price
$74.00
per
Yard
Regular price
Sale price
$74.00
Unit price
per
Shipping calculated at checkout.
Minimum of 3 Yard
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local sand, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your sand isn't the quantity or quality you ordered, we'll make it right.
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and typical install depth for joint filling or mortar prep runs 1 to 2 inches. For a standard 200 square foot patio's paver joints, a fraction of a yard usually does it, but mortar mixing on a bigger masonry job can eat through a full yard fast. Order by the cubic yard and size up slightly if you are mixing mortar on site, since mix ratios vary by trade.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Mason sand pairs naturally with paver base gravel and edging materials for patios and walkways, and with mortar mix bags for masonry work. If you are building a pool deck, ask about chip stone as a bedding alternative, since it is increasingly the local choice over sand under pavers.
Mulch Mound Pro Tip
Alpharetta's clay soil holds water, so if you are using mason sand as a bedding layer near grade, make sure it has somewhere to drain rather than sitting on packed clay that traps moisture underneath. A lot of masons here now favor chip stone for bedding specifically because it does not pump moisture up through joints the way sand can after a hard rain, which matters given our wet spring and fall stretches.
Mulch Mound Pro Tip
The most common mistake on mortar jobs is mixing sand that is still damp from storage, which throws off water ratios in the batch. Let delivered sand sit under cover for a day if rain is forecast, or tarp the pile, so your mortar mix stays consistent from the first batch to the last.
Mulch Mound Pro Tip
If your project needs both mortar sand and paver base material, order them as separate deliveries rather than trying to blend uses from one pile, since paver base gravel and mason sand serve different jobs and mixing them undermines both. Buying exactly what each stage needs, rather than one oversized load, usually keeps a hardscape budget on track.
Working With Sand in Alpharetta
Alpharetta sits on red clay, which is workable for planting beds but a poor choice under pavers or in a mortar mix. Mason sand gives masons and hardscapers a clean, predictable material that does not carry the clay's swelling and drainage problems. Around the Ameris Bank Amphitheatre and the newer developments nearby, a lot of the hardscape work is fresh construction, patios, walkways, pool surrounds, where a stable base layer matters. This sand fills that role for joints and mortar work, though for bedding under pavers many local crews have shifted to chip stone instead.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.